#
# When we also provide SSL we have to listen to the
# the HTTPS port in addition.
#
Listen 7081
##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog exec:/usr/libexec/httpd-ssl-pass-dialog
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
SSLSessionCache shmcb:/run/httpd/sslcache(512000)
SSLSessionCacheTimeout 300
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the
# SSL library. The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
SSLRandomSeed startup file:/dev/urandom 256
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512
#
# Use "SSLCryptoDevice" to enable any supported hardware
# accelerators. Use "openssl engine -v" to list supported
# engine names. NOTE: If you enable an accelerator and the
# server does not start, consult the error logs and ensure
# your accelerator is functioning properly.
#
SSLCryptoDevice builtin
#SSLCryptoDevice ubsec
##
## SSL Virtual Host Context
##
#<VirtualHost _default_:443>
#
## General setup for the virtual host, inherited from global configuration
##DocumentRoot "/var/www/html"
##ServerName www.example.com:443
#
## Use separate log files for the SSL virtual host; note that LogLevel
## is not inherited from httpd.conf.
#ErrorLog logs/ssl_error_log
#TransferLog logs/ssl_access_log
#LogLevel warn
#
## SSL Engine Switch:
## Enable/Disable SSL for this virtual host.
#SSLEngine on
#
## SSL Protocol support:
## List the enable protocol levels with which clients will be able to
## connect. Disable SSLv2 access by default:
SSLProtocol +TLSv1.1 +TLSv1.2
#
## SSL Cipher Suite:
## List the ciphers that the client is permitted to negotiate.
## See the mod_ssl documentation for a complete list.
SSLCipherSuite ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384
#
## Speed-optimized SSL Cipher configuration:
## If speed is your main concern (on busy HTTPS servers e.g.),
## you might want to force clients to specific, performance
## optimized ciphers. In this case, prepend those ciphers
## to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
## Caveat: by giving precedence to RC4-SHA and AES128-SHA
## (as in the example below), most connections will no longer
## have perfect forward secrecy - if the server's key is
## compromised, captures of past or future traffic must be
## considered compromised, too.
##SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
SSLHonorCipherOrder on
#
## Server Certificate:
## Point SSLCertificateFile at a PEM encoded certificate. If
## the certificate is encrypted, then you will be prompted for a
## pass phrase. Note that a kill -HUP will prompt again. A new
## certificate can be generated using the genkey(1) command.
#SSLCertificateFile /etc/pki/tls/certs/localhost.crt
#
## Server Private Key:
## If the key is not combined with the certificate, use this
## directive to point at the key file. Keep in mind that if
## you've both a RSA and a DSA private key you can configure
## both in parallel (to also allow the use of DSA ciphers, etc.)
#SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
#
## Server Certificate Chain:
## Point SSLCertificateChainFile at a file containing the
## concatenation of PEM encoded CA certificates which form the
## certificate chain for the server certificate. Alternatively
## the referenced file can be the same as SSLCertificateFile
## when the CA certificates are directly appended to the server
## certificate for convinience.
##SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
#
## Certificate Authority (CA):
## Set the CA certificate verification path where to find CA
## certificates for client authentication or alternatively one
## huge file containing all of them (file must be PEM encoded)
##SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
#
## Client Authentication (Type):
## Client certificate verification type and depth. Types are
## none, optional, require and optional_no_ca. Depth is a
## number which specifies how deeply to verify the certificate
## issuer chain before deciding the certificate is not valid.
##SSLVerifyClient require
##SSLVerifyDepth 10
#
## Access Control:
## With SSLRequire you can do per-directory access control based
## on arbitrary complex boolean expressions containing server
## variable checks and other lookup directives. The syntax is a
## mixture between C and Perl. See the mod_ssl documentation
## for more details.
##<Location />
##SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
## and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
## and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
## and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
## and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
## or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
##</Location>
#
## SSL Engine Options:
## Set various options for the SSL engine.
## o FakeBasicAuth:
## Translate the client X.509 into a Basic Authorisation. This means that
## the standard Auth/DBMAuth methods can be used for access control. The
## user name is the `one line' version of the client's X.509 certificate.
## Note that no password is obtained from the user. Every entry in the user
## file needs this password: `xxj31ZMTZzkVA'.
## o ExportCertData:
## This exports two additional environment variables: SSL_CLIENT_CERT and
## SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
## server (always existing) and the client (only existing when client
## authentication is used). This can be used to import the certificates
## into CGI scripts.
## o StdEnvVars:
## This exports the standard SSL/TLS related `SSL_*' environment variables.
## Per default this exportation is switched off for performance reasons,
## because the extraction step is an expensive operation and is usually
## useless for serving static content. So one usually enables the
## exportation for CGI and SSI requests only.
## o StrictRequire:
## This denies access when "SSLRequireSSL" or "SSLRequire" applied even
## under a "Satisfy any" situation, i.e. when it applies access is denied
## and no other module can change it.
## o OptRenegotiate:
## This enables optimized SSL connection renegotiation handling when SSL
## directives are used in per-directory context.
##SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
#<Files ~ "\.(cgi|shtml|phtml|php3?)$">
# SSLOptions +StdEnvVars
#</Files>
#<Directory "/var/www/cgi-bin">
# SSLOptions +StdEnvVars
#</Directory>
#
## SSL Protocol Adjustments:
## The safe and default but still SSL/TLS standard compliant shutdown
## approach is that mod_ssl sends the close notify alert but doesn't wait for
## the close notify alert from client. When you need a different shutdown
## approach you can use one of the following variables:
## o ssl-unclean-shutdown:
## This forces an unclean shutdown when the connection is closed, i.e. no
## SSL close notify alert is send or allowed to received. This violates
## the SSL/TLS standard but is needed for some brain-dead browsers. Use
## this when you receive I/O errors because of the standard approach where
## mod_ssl sends the close notify alert.
## o ssl-accurate-shutdown:
## This forces an accurate shutdown when the connection is closed, i.e. a
## SSL close notify alert is send and mod_ssl waits for the close notify
## alert of the client. This is 100% SSL/TLS standard compliant, but in
## practice often causes hanging connections with brain-dead browsers. Use
## this only for browsers where you know that their SSL implementation
## works correctly.
## Notice: Most problems of broken clients are also related to the HTTP
## keep-alive facility, so you usually additionally want to disable
## keep-alive for those clients, too. Use variable "nokeepalive" for this.
## Similarly, one has to force some clients to use HTTP/1.0 to workaround
## their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
## "force-response-1.0" for this.
#BrowserMatch "MSIE [2-5]" \
# nokeepalive ssl-unclean-shutdown \
# downgrade-1.0 force-response-1.0
#
## Per-Server Logging:
## The home of a custom SSL log file. Use this when you want a
## compact non-error SSL logfile on a virtual host basis.
#CustomLog logs/ssl_request_log \
# "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#
#</VirtualHost>