Issue DRWeb logging to root console

[uniauto]

Server operating system version

Debian 12.6

Plesk version and microupdate number

Plesk Obsidian 18.0.62

Hi.

Since I migrated my server from Debian 10 to Debian 12 I have a strange issue that all logings from DrWeb is shown directly into the root console / SSH Terminal Extension.
This is not happening with SSH clients(Login as user debian, then using sudo su)

drweb32.ini and drweb_handler.conf on new and old server are equals the same.

Found this related thread

DRWeb logging to console

Hi Everybody, since some days I have the strange issue that all logings from DrWeb is shown directly into the console. For example if I connect to my Server via SSH and then I sned an email to my email accoutn I see the logging of the spool. root@************:~# 2015 Mar 25 16:44:57 *...

talk.plesk.com

Tried to remove/install again Parallels Premium antivirus.

Triend to edit /etc/drweb/drweb32.ini and set Quiet Mode
# OutputMode = {Quiet|Terminal}
# Information output mode at start.
OutputMode = Quiet

Nothing worked.

grep -i log /etc/drweb/drweb32.ini

# LogFileName = {FilePath}
# Log filename.
LogFileName = syslog
# SyslogFacility = {
# Sets the log type when using syslogd system service.
SyslogFacility = Daemon
# SyslogPriority = {Error|Info|Notice|Warning|Alert}
# Sets the log priority when using syslogd system service.
# SyslogPriority = Info
# LimitLog = {Boolean}
# Specifies whether the log file size must be limited, or not.
LimitLog = no
# MaxLogSize = {Digital}
# Maximum log file size.
MaxLogSize = 512
# LogScanned = {Boolean}
# Whether to log or not information about all checked objects (infected and
LogScanned = yes
# LogPacked = {Boolean}
# Whether to log or not additional information about files packed by DIET, PKLITE
LogPacked = yes
# LogArchived = {Boolean}
# Whether to log or not additional information about files archived by RAR, ZIP,
LogArchived = yes
# LogTime = {Boolean}
# Whether to log or not the time for each record.
LogTime = yes
# LogProcessInfo = {Boolean}
# Whether to log or not clients address (hostname or IP) and PID of every
LogProcessInfo = yes
# ClientsLogs = {String}
# Splitting the log files.
# ClientsLogs = drwebdc:/var/drweb/log/drwebdc.log,smb_spider:syslog,mail:/var/drweb/log/drwebmail.log,kerio:syslog,lotus:syslog
# Enables output of update session log to stdout.
# ProxyLogin = {String}
ProxyLogin =
# LogFileName = {FilePath}
# Log filename.
LogFileName = syslog
# LogLevel = {Quiet|Error|Warning|Info|Verbose|Debug}
# Log verbosity level.
LogLevel = Info
# SyslogFacility = {
# Sets the log type when using syslogd system service.
SyslogFacility = Daemon

grep -i log /etc/drweb/drweb_handler.conf

# Logging section #
[Logging]
# Logging detalization ( Quiet, Errors, Alerts, Info, Verbose, Debug )
# Facility used for logging to syslog ( Daemon, Mail, Local0..7 )
SyslogFacility = Mail
# Priority used for logging to syslog ( Debug, Info, Notice, Alert )
SyslogPriority = Info

/etc/syslog-ng/scl.conf

@module appmodel
@include 'scl/*/*.conf'
@define java-module-dir "`module-install-dir`/java-modules"

/etc/syslog-ng/syslog-ng.conf

@version: 3.38
@include "scl.conf"

# Syslog-ng configuration file, compatible with default Debian syslogd
# installation.

# First, set some global options.
options { chain_hostnames(off); flush_lines(0); use_dns(no); use_fqdn(no);
dns_cache(no); owner("root"); group("adm"); perm(0640);
stats_freq(0); bad_hostname("^gconfd$");
};

########################
# Sources
########################
# This is the default behavior of sysklogd package
# Logs may come from unix stream, but not from another machine.
#
source s_src {
system();
internal();
};

# If you wish to get logs from remote machine you should uncomment
# this and comment the above source line.
#
#source s_net { tcp(ip(127.0.0.1) port(1000)); };

########################
# Destinations
########################
# First some standard logfile
#
destination d_auth { file("/var/log/auth.log"); };
destination d_cron { file("/var/log/cron.log"); };
destination d_daemon { file("/var/log/daemon.log"); };
destination d_kern { file("/var/log/kern.log"); };
destination d_lpr { file("/var/log/lpr.log"); };
destination d_mail { file("/var/log/maillog"); };
destination d_syslog { file("/var/log/syslog"); };
destination d_user { file("/var/log/user.log"); };
destination d_uucp { file("/var/log/uucp.log"); };

# This files are the log come from the mail subsystem.
#
destination d_mailinfo { file("/var/log/mail.info"); };
destination d_mailwarn { file("/var/log/mail.warn"); };
destination d_mailerr { file("/var/log/mail.err"); };

# Logging for INN news system
#
destination d_newscrit { file("/var/log/news/news.crit"); };
destination d_newserr { file("/var/log/news/news.err"); };
destination d_newsnotice { file("/var/log/news/news.notice"); };

# Some 'catch-all' logfiles.
#
destination d_debug { file("/var/log/debug"); };
destination d_error { file("/var/log/error"); };
destination d_messages { file("/var/log/messages"); };

# The root's console.
#
destination d_console { usertty("root"); };

# Virtual console.
#
destination d_console_all { getvirtconsole(); };

# The named pipe /dev/xconsole is for the nsole' utility. To use it,
# you must invoke nsole' with the -file' option:
#
# $ xconsole -file /dev/xconsole [...]
#
destination d_xconsole { pipe("/dev/xconsole"); };

# Send the messages to an other host
#
#destination d_net { tcp("127.0.0.1" port(1000) log_fifo_size(1000)); };

# Debian only
destination d_ppp { file("/var/log/ppp.log"); };

########################
# Filters
########################
# Here's come the filter options. With this rules, we can set which
# message go where.

filter f_dbg { level(debug); };
filter f_info { level(info); };
filter f_notice { level(notice); };
filter f_warn { level(warn); };
filter f_err { level(err); };
filter f_crit { level(crit .. emerg); };

filter f_debug { level(debug) and not facility(auth, authpriv, news, mail); };
filter f_error { level(err .. emerg) ; };
filter f_messages { level(info,notice,warn) and
not facility(auth,authpriv,cron,daemon,mail,news); };

filter f_auth { facility(auth, authpriv) and not filter(f_dbg); };
filter f_cron { facility(cron) and not filter(f_dbg); };
filter f_daemon { facility(daemon) and not filter(f_dbg); };
filter f_kern { facility(kern) and not filter(f_dbg); };
filter f_lpr { facility(lpr) and not filter(f_dbg); };
filter f_local { facility(local0, local1, local3, local4, local5,
local6, local7) and not filter(f_dbg); };
filter f_mail { facility(mail) and not filter(f_dbg); };
filter f_news { facility(news) and not filter(f_dbg); };
filter f_syslog3 { not facility(auth, authpriv, mail) and not filter(f_dbg); };
filter f_user { facility(user) and not filter(f_dbg); };
filter f_uucp { facility(uucp) and not filter(f_dbg); };

filter f_cnews { level(notice, err, crit) and facility(news); };
filter f_cother { level(debug, info, notice, warn) or facility(daemon, mail); };

filter f_ppp { facility(local2) and not filter(f_dbg); };
filter f_console { level(warn .. emerg); };

########################
# Log paths
########################
log { source(s_src); filter(f_auth); destination(d_auth); };
log { source(s_src); filter(f_cron); destination(d_cron); };
log { source(s_src); filter(f_daemon); destination(d_daemon); };
log { source(s_src); filter(f_kern); destination(d_kern); };
log { source(s_src); filter(f_lpr); destination(d_lpr); };
log { source(s_src); filter(f_syslog3); destination(d_syslog); };
log { source(s_src); filter(f_user); destination(d_user); };
log { source(s_src); filter(f_uucp); destination(d_uucp); };

log { source(s_src); filter(f_mail); destination(d_mail); };
#log { source(s_src); filter(f_mail); filter(f_info); destination(d_mailinfo); };
#log { source(s_src); filter(f_mail); filter(f_warn); destination(d_mailwarn); };
#log { source(s_src); filter(f_mail); filter(f_err); destination(d_mailerr); };

log { source(s_src); filter(f_news); filter(f_crit); destination(d_newscrit); };
log { source(s_src); filter(f_news); filter(f_err); destination(d_newserr); };
log { source(s_src); filter(f_news); filter(f_notice); destination(d_newsnotice); };
#log { source(s_src); filter(f_cnews); destination(d_console_all); };
#log { source(s_src); filter(f_cother); destination(d_console_all); };

#log { source(s_src); filter(f_ppp); destination(d_ppp); };

log { source(s_src); filter(f_debug); destination(d_debug); };
log { source(s_src); filter(f_error); destination(d_error); };
log { source(s_src); filter(f_messages); destination(d_messages); };

log { source(s_src); filter(f_console); destination(d_console_all); destination(d_xconsole); };
log { source(s_src); filter(f_crit); destination(d_console); };

# All messages send to a remote site
#
#log { source(s_src); destination(d_net); };

###
# Include all config files in /etc/syslog-ng/conf.d/
###
@include "/etc/syslog-ng/conf.d/*.conf"

Thanks for any hints.