hard disk quota is not supported

[maxtcs]

I have a centOS 5 with PLEK 8.2.1

I'm trying to enable Hard disk quota in domain setup, its showing "Unlimited (hard disk quota is not supported)"

so i run :

# /usr/local/psa/admin/sbin/usermng --isquotable
usermng: Userquota not enabled on device: /dev/md1

System error 2: No such file or directory
usermng: Userquota not enabled on device: /dev/md1

System error 2: No such file or directory
1

what's going on ?
below is the fstab from my server
Someone please point me how to enable hard disk quota please ...
million of thanks!

/dev/md0                /                       ext3    defaults        1 1
LABEL=/boot             /boot                   ext3    defaults        1 2
LABEL=/boot11           /boot1                  ext3    defaults        1 2
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
tmpfs                   /dev/shm                tmpfs   defaults        0 0
/dev/md2                /home                   ext3    defaults        1 2
proc                    /proc                   proc    defaults        0 0
sysfs                   /sys                    sysfs   defaults        0 0
/dev/md1                /var                    ext3    defaults        1 2
LABEL=SWAP-sdb3         swap                    swap    defaults        0 0
LABEL=SWAP-sda5         swap                    swap    defaults        0 0

 

[anb_t]

Try this knowledge base article:

http://kb.swsoft.com/en/768

./anb

 

[maxtcs]

Originally posted by anb_t
Try this knowledge base article:

http://kb.swsoft.com/en/768

./anb

sorry ... i'm noobie in linux ...
doesn't work .
below is the error message

# cat /etc/fstab
/dev/md0                /                       ext3    defaults        1 1
LABEL=/boot             /boot                   ext3    defaults        1 2
LABEL=/boot11           /boot1                  ext3    defaults        1 2
devpts                  /dev/pts                devpts  gid=5,mode=620  0 0
tmpfs                   /dev/shm                tmpfs   defaults        0 0
/dev/md2                /home                   ext3    defaults        1 2
proc                    /proc                   proc    defaults        0 0
sysfs                   /sys                    sysfs   defaults        0 0
/dev/md1                /var                    ext3    defaults,userquota        1 2
LABEL=SWAP-sdb3         swap                    swap    defaults        0 0
LABEL=SWAP-sda5         swap                    swap    defaults        0 0

# /sbin/quotaon /dev/md1
quotaon: Can't find mountpoint for device /dev/md1
quotaon: No correct mountpoint specified.

 

[anb_t]

Does the '/var' directory exists?
Try

~# mount /var

./anb

 

[maxtcs]

Originally posted by anb_t
Does the '/var' directory exists?
Try

~# mount /var

./anb

yeah ... sure '/var' exists

# mount /var
mount: /dev/md1 already mounted or /var busy
mount: according to mtab, /dev/md1 is already mounted on /var

Below is the statistics from PLESK control panel

 

[maxtcs]

# cat /etc/mtab
/dev/md0 / ext3 rw 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
/dev/sda1 /boot ext3 rw 0 0
/dev/sdb6 /boot1 ext3 rw 0 0
tmpfs /dev/shm tmpfs rw 0 0
/dev/md2 /home ext3 rw 0 0
/dev/md1 /var ext3 rw 0 0
none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
/proc /var/named/run-root/proc none rw,bind 0 0
/var/run/dbus /var/named/run-root/var/run/dbus none rw,bind 0 0

anyone has any idea ?

 

[Filipe Miranda]

Hello,

You got the wrong parameter:
/dev/md1 /var ext3 defaults,userquota 1 2

Its not userquota, its usrquota....

This is old but might help:
http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/custom-guide/ch-disk-quotas.html


Regards,
Filipe Miranda