Resolved IPv6 not working

[Creativados]

This is se second part for this thread

Let's Encrypt fail over IPv6

Simplifying the subject

# ping6 google.com
connect: Network is unreachable

but

# ip address
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether d0:50:99:d2:32:82 brd ff:ff:ff:ff:ff:ff
inet 51.83.2.118/24 brd 51.83.2.255 scope global dynamic eno1
valid_lft 76831sec preferred_lft 76831sec
inet6 2001:41d0:203:4b76::/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::d250:99ff:fed2:3282/64 scope link
valid_lft forever preferred_lft forever
3: eno2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether d0:50:99:d2:32:83 brd ff:ff:ff:ff:ff:ff


where is the problem?

Thanks

 

[Erwan]

Hi,

Do you have found a solution?
We have the same problem...

 

[Creativados]

Hi,

Do you have found a solution?
We have the same problem...

Hi,


It was a problem in the OVH network card that they solved.
This was the explanation they gave me:

We have corrected the space in front of the first `dev eno1`.
No firewall has been detected on the server, so we have executed a software reboot.

The server is booted on disk and is on the login screen. Ping OK and services are up.