• Introducing WebPros Cloud - a fully managed infrastructure platform purpose-built to simplify the deployment of WebPros products !  WebPros Cloud enables you to easily deliver WebPros solutions — without the complexity of managing the infrastructure.
    Join the pilot program today!
  • Support for BIND DNS has been removed from Plesk for Windows due to security and maintenance risks.
    If a Plesk for Windows server is still using BIND, the upgrade to Plesk Obsidian 18.0.70 will be unavailable until the administrator switches the DNS server to Microsoft DNS.

Massive stability problems, can anyone diagnose?

M

milescook

Guest
Hi, I've a feeling this may take a while to sort out!

I've had a dedicated server with plesk 8.1 installed, though I'm not 100% sure plesk is causing the problems, because it has been freezing about once every 10 days (sometimes twice a week!) for the past 5 months. My dedicated server support staff have ran a hardware stress test on the cpu and hard drives and they say all checks out fine.

Here is the latest output in dmesg:

hald-probe-smbi[3360] trap stack segment rip:4010d0 rsp:7fff0724eab0 error:0
fstab-sync[3362]: segfault at 0000000000000000 rip 0000000000404307 rsp 00007fffd5516620 error 4
md: md7: resync done.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda7
disk 1, wo:0, o:1, dev:sdb7
BUG: soft lockup detected on CPU#0!

Call Trace:
<IRQ> [<ffffffff80260a8a>] softlockup_tick+0xfa/0x120
[<ffffffff80239eef>] __do_softirq+0x5f/0xd0
[<ffffffff8023e447>] update_process_times+0x57/0x90
[<ffffffff80217324>] smp_local_timer_interrupt+0x34/0x60
[<ffffffff80217889>] smp_apic_timer_interrupt+0x59/0x80
[<ffffffff80209240>] default_idle+0x0/0x50
[<ffffffff8020ac06>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff80285e99>] drain_array+0xd9/0x100
[<ffffffff802873ff>] cache_reap+0xff/0x280
[<ffffffff80287300>] cache_reap+0x0/0x280
[<ffffffff802457a7>] run_workqueue+0xa7/0x160
[<ffffffff80245f20>] worker_thread+0x0/0x190
[<ffffffff8024606b>] worker_thread+0x14b/0x190
[<ffffffff8022eef0>] default_wake_function+0x0/0x10
[<ffffffff80245f20>] worker_thread+0x0/0x190
[<ffffffff80249309>] kthread+0xd9/0x120
[<ffffffff8020ade8>] child_rip+0xa/0x12
[<ffffffff80249230>] kthread+0x0/0x120
[<ffffffff8020adde>] child_rip+0x0/0x12

then shortly after reboot (because that looked a bit sick to me!)

Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k
Adding 1959920k swap on /dev/sdb2. Priority:-2 extents:1 across:1959920k
hald-probe-smbi[3371] trap stack segment rip:4010d0 rsp:7fff1151cd70 error:0
fstab-sync[3373]: segfault at 0000000000000000 rip 0000000000404307 rsp 00007fff7e260910 error 4

The entire dmesg

Many thanks if you can help!
 
Back
Top