Resolved Nameservers do not read the domain transfer

[Adam Makowski]

Hi
I have problem with domain transfer to my nameservers.
Exactly, it doesn't execute without restart bind
I don't know what the cause is
when I change the nameservers of a domain to my nameservers the transfer does not take place even after 24h
only when I reset the dns settings for the whole server again, suddenly the propagation works and the domain is available in a moment

My bind plesk settings
auth-nxdomain no;
version "Not Old!";
send-cookie yes;
prefetch 2 9;
require-server-cookie yes;
notify yes;
hostname "xxx";
recursive-clients 20000;
tcp-clients 20000;
minimal-responses yes;
listen-on-v6 { any; };
rate-limit {
responses-per-second 10;
};

sysctl.conf - Is it also possible that something in my file settings is blocking it?
vm.overcommit_memory = 1
vm.swappiness = 1
fs.file-max = 1048576
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.all.secure_redirects = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.tcp_max_orphans = 65536
net.ipv4.tcp_fin_timeout = 10
net.ipv4.tcp_keepalive_time = 1800
net.ipv4.tcp_keepalive_intvl = 15
net.ipv4.tcp_keepalive_probes = 5
net.ipv4.tcp_max_syn_backlog = 4096
net.ipv4.tcp_synack_retries = 1
net.ipv4.tcp_mem = 50576 64768 98152
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 65536 16777216
net.ipv4.tcp_orphan_retries = 0
net.ipv4.tcp_syncookies = 0
net.nf_conntrack_max = 16777216
net.netfilter.nf_conntrack_max = 16777216
net.ipv4.tcp_timestamps = 1
net.ipv4.tcp_sack = 1
net.ipv4.tcp_congestion_control = htcp
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.route.flush = 1
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.lo.rp_filter = 1
net.ipv4.conf.enp0s3.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.lo.accept_source_route = 0
net.ipv4.conf.enp0s3.accept_source_route = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.ip_local_port_range = 1024 65535
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_rfc1337 = 1
net.ipv4.ip_forward = 0
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_echo_ignore_all = 1
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.core.somaxconn = 65535
net.core.netdev_max_backlog = 1000
net.core.rmem_default = 65536
net.core.wmem_default = 65536
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216

I'd appreciate any tips
Regards

 

[Adam Makowski]

Can a blocked ping service on a server have a negative effect on this?

 

[Adam Makowski]

Hi, I found solution
the key in etc/bind/rndc.key was different from the one in plesk bind installation in var catalog.
it must be the same. when i changed it to the same dns server it started working.
Fixing BIND9 rndc error "connection to remote host closed"

 

[marcuscole]

Where did you manage to find all these information?