1. Please take a little time for this simple survey! Thank you for participating!
    Dismiss Notice
  2. Dear Pleskians, please read this carefully! New attachments and other rules Thank you!
    Dismiss Notice
  3. Dear Pleskians, I really hope that you will share your opinion in this Special topic for chatter about Plesk in the Clouds. Thank you!
    Dismiss Notice

In a bind over BIND CPU Utilization

Discussion in 'Plesk for Windows - 8.x and Older' started by 01010110, Jul 17, 2004.

  1. 01010110

    01010110 Guest

    I have a new server with Plesk 6.5 for Windows. Apart from half a dozen domains installed (and not really being used) this is a vanilla Plesk installation done by the techies at Server Matrix.

    BIND appears to be doing it's job just fine. Here is an example DNS report which shows that apart from a few warnings everything is working ok:


    The problem is after about an hour or so the CPU utilisation goes to around 40%. If I shutdown BIND and then restart it again everything is ok for another hour.

    The server is running Windows 2003 with the following spec:
    Dual 2.4GHz Xeons
    2 x 80GB Drives
    2024MB RAM

    Does anyone know what maybe causing BIND to use so much CPU and what the cure might be?

    Many thanks,