0
01010110
Guest
I have a new server with Plesk 6.5 for Windows. Apart from half a dozen domains installed (and not really being used) this is a vanilla Plesk installation done by the techies at Server Matrix.
BIND appears to be doing it's job just fine. Here is an example DNS report which shows that apart from a few warnings everything is working ok:
http://www.dnsreport.com/tools/dnsreport.ch?domain=adzapper.biz
The problem is after about an hour or so the CPU utilisation goes to around 40%. If I shutdown BIND and then restart it again everything is ok for another hour.
The server is running Windows 2003 with the following spec:
Dual 2.4GHz Xeons
2 x 80GB Drives
2024MB RAM
Does anyone know what maybe causing BIND to use so much CPU and what the cure might be?
Many thanks,
Martyn
BIND appears to be doing it's job just fine. Here is an example DNS report which shows that apart from a few warnings everything is working ok:
http://www.dnsreport.com/tools/dnsreport.ch?domain=adzapper.biz
The problem is after about an hour or so the CPU utilisation goes to around 40%. If I shutdown BIND and then restart it again everything is ok for another hour.
The server is running Windows 2003 with the following spec:
Dual 2.4GHz Xeons
2 x 80GB Drives
2024MB RAM
Does anyone know what maybe causing BIND to use so much CPU and what the cure might be?
Many thanks,
Martyn