Facebook
TwitterThis server is 2012 R2.
The interface available at Tools & Settings >> IP addresses loads and shows all IP addresses.
Unfortunately, clicking on about half the IP addresses shows a page without some text replacements unassigned and little other data. Here's a copy & paste of some of the content:
Public IP address [_]
You can use a public IP address if your Plesk server is behind NAT
The IP address is distributed as
[_] Shared
[x] Dedicated
SSL/TLS certificate [...]
Default site [...]
[[secureFtpSection]]
[[ftpOverSsl]]
[[ftpOverSslOptionRequired]]
[[ftpOverSslOptionEnabled]]
[[ftpOverSslOptionDisabled]]
[[ftpOverSslCustomDisabledHint]]
The interface available at Tools & Settings >> IP addresses loads and shows all IP addresses.
Unfortunately, clicking on about half the IP addresses shows a page without some text replacements unassigned and little other data. Here's a copy & paste of some of the content:
Public IP address [_]
You can use a public IP address if your Plesk server is behind NAT
The IP address is distributed as
[_] Shared
[x] Dedicated
SSL/TLS certificate [...]
Default site [...]
[[secureFtpSection]]
[[ftpOverSsl]]
[[ftpOverSslOptionRequired]]
[[ftpOverSslOptionEnabled]]
[[ftpOverSslOptionDisabled]]
[[ftpOverSslCustomDisabledHint]]
