memailfilter_usr.exe

[provagino]

hii All
I have problem with my plesk 8.2 on windows 2003 and mail enabled 1.983

EVENT ID : 1
Source: memailfilter_usr.exe
Description:
Unable to connect to pipe \\.\pipe\psamailfilterpipe
at (Con::ClientOverlappedPipe::create line 485)
at Mail filter main(wmain line 20)
Execute file name:
C:\Program Files\SWsoft\Plesk\admin\bin\memailfilter_usr.exe

how can i salve that problem?
thanks

 

[Soulhuntre]

I am having a similar problem.

Event Type: Error
Event Source: memailfilter_usr.exe
Event Category: None
Event ID: 1
Date: 10/1/2007
Time: 8:41:10 AM
User: N/A
Computer: ARAGORN
Description:
The system cannot find the file specified. (Error code 2) at Unable to connect to pipe \\.\pipe\psamailfilterpipe
at (Con::ClientOverlappedPipe::create line 482)
at Mail filter main(wmain line 20)
Execute file name: C:\Program Files\SWsoft\Plesk\admin\bin\memailfilter_usr.exe

 

[datThomas]

I am having the same problem. Any resolution?

 

[tiramisu]

you should try this

http://kb.swsoft.com/en/2060

 

[unika]

also try to check this

http://kb.swsoft.com/en/1537

 

[tiramisu]

in this situation, every should check ISAPI filters on server,
what are trying to be loaded and what loaded,etc.
most probably the problem is in filters.
if some filters are not loaded, they can be removed.

 

[tiramisu_]

also you may upgrade to 8.2.0.1 version

 

[datThomas]

Originally posted by tany
also you may upgrade to 8.2.0.1 version

That would be the resolution from the above post:

"you should try this

http://kb.swsoft.com/en/2060"

 

[funky123]

all: how will check if i am running plesk 8.2.0 install or 8.2.0.1 version?

 

[tiramisu_]

ok, go RegEdit >> HKEY_LOCAL_MACHINE >> Software >> Plesk >> Psa config >> Config >> Full version

 

[funky123]

thanks

will check that

i am trying to colve a problem where a maibox suddenly stopped login in

nothing specific in plesk admin logs,
however horde shows :
FAILED LOGIN x.x.x.x to localhost:110[pop3/notls] as [email protected]

 

[funky123]

found these in plesk event logs

in event log these are few most recent errors

2/4/2008 9:20:27 PM memailfilter_usr.exe Error
None 1 N/A READY4GOONLINE "Unable to connect to pipe \\.\pipe\psamailfilterpipe
at (Con::ClientOverlappedPipe::create line 485)
at Mail filter main(wmain line 20)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\memailfilter_usr.exe"

2/4/2008 9:20:27 PM memailfilter_usr.exe Error None 1 N/A ************************ "Unable to connect to pipe \\.\pipe\psamailfilterpipe
at (Con::ClientOverlappedPipe::create line 485)
at Mail filter main(wmain line 20)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\memailfilter_usr.exe"

2/1/2008 9:53:53 AM memailfilter_usr.exe Error None 1 N/A ************************ "Unable to connect to pipe \\.\pipe\psamailfilterpipe
at (Con::ClientOverlappedPipe::create line 485)
at Mail filter main(wmain line 20)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\memailfilter_usr.exe"
1/31/2008 8:59:57 AM memailfilter_usr.exe Error None 1 N/A ************************ "The system cannot find the file specified. (Error code 2) at Unable to connect to pipe \\.\pipe\psamailfilterpipe
at (Con::ClientOverlappedPipe::create line 482)
at Mail filter main(wmain line 20)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\memailfilter_usr.exe"

1/30/2008 3:13:12 PM mailmng.exe Error None 1 N/A ************************ "MEAOPO.Mailbox.GetMailbox failed
at (MailEnable::MailEnableMailName::MailEnableMailNam e line 92)
at execute console command --add-mailbox(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --add-mailbox ""--domain-name=**********************"" ""--mailname=*******"" ""--password=jkd7Gj3"" ""--password=jkd7Gj3""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 3:12:14 PM mailmng.exe Error None 1 N/A ************************ "The process cannot access the file because it is being used by another process. (Error code 32) at delete file c:\Program Files\SWsoft\Plesk\Mail Servers\Mail Enable\Postoffices\**********************\MAILROOT \*******\Inbox\EBF12CE768B24E9B937E959B5DF61AA1.MA I
at (removeDir line 260)
at execute console command --remove-mailname(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --remove-mailname ""--domain-name=**********************"" ""--mailname=*******""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 3:11:06 PM mailmng.exe Error None 1 N/A ************************ "MEAOPO.Mailbox.GetMailbox failed
at (MailEnable::MailEnableMailName::MailEnableMailNam e line 92)
at execute console command --add-mailbox(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --add-mailbox ""--domain-name=**********************"" ""--mailname=*******"" ""--password=jkd7Gj3"" ""--password=jkd7Gj3""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 3:06:52 PM mailmng.exe Error None 1 N/A ************************ "MEAOPO.Mailbox.GetMailbox failed
at (MailEnable::MailEnableMailName::MailEnableMailNam e line 92)
at execute console command --add-mailbox(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --add-mailbox ""--domain-name=**********************"" ""--mailname=*******"" ""--password=jkd7Gj3"" ""--password=jkd7Gj3""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 3:06:44 PM mailmng.exe Error None 1 N/A ************************ "MEAOPO.Mailbox.GetMailbox failed
at (MailEnable::MailEnableMailName::MailEnableMailNam e line 92)
at execute console command --add-mailbox(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --add-mailbox ""--domain-name=**********************"" ""--mailname=*******"" ""--password=jkd7Gj3"" ""--password=jkd7Gj3""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 11:20:32 AM mailmng.exe Error None 1 N/A ************************ "The process cannot access the file because it is being used by another process. (Error code 32) at delete file c:\Program Files\SWsoft\Plesk\Mail Servers\Mail Enable\Postoffices\**********************\MAILROOT \*******\Inbox\EBF12CE768B24E9B937E959B5DF61AA1.MA I
at (removeDir line 260)
at execute console command --remove-mailname(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --remove-mailname ""--domain-name=**********************"" ""--mailname=*******""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 11:15:21 AM mailmng.exe Error None 1 N/A ************************ "The process cannot access the file because it is being used by another process. (Error code 32) at delete file c:\Program Files\SWsoft\Plesk\Mail Servers\Mail Enable\Postoffices\**********************\MAILROOT \*******\Inbox\EBF12CE768B24E9B937E959B5DF61AA1.MA I
at (removeDir line 260)
at execute console command --remove-mailname(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --remove-mailname ""--domain-name=**********************"" ""--mailname=*******""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 11:14:56 AM mailmng.exe Error None 1 N/A ************************ "The process cannot access the file because it is being used by another process. (Error code 32) at delete file c:\Program Files\SWsoft\Plesk\Mail Servers\Mail Enable\Postoffices\**********************\MAILROOT \*******\Inbox\EBF12CE768B24E9B937E959B5DF61AA1.MA I
at (removeDir line 260)
at execute console command --remove-mailname(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --remove-mailname ""--domain-name=**********************"" ""--mailname=*******""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 11:14:27 AM mailmng.exe Error None 1 N/A ************************ "The process cannot access the file because it is being used by another process. (Error code 32) at delete file c:\Program Files\SWsoft\Plesk\Mail Servers\Mail Enable\Postoffices\**********************\MAILROOT \*******\Inbox\EBF12CE768B24E9B937E959B5DF61AA1.MA I
at (removeDir line 260)
at execute console command --remove-mailname(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --remove-mailname ""--domain-name=**********************"" ""--mailname=*******""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 11:14:04 AM mailmng.exe Error None 1 N/A ************************ "MEAOPO.Mailbox.GetMailbox failed
at (MailEnable::MailEnableMailName::MailEnableMailNam e line 92)
at execute console command --add-mailbox(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --add-mailbox ""--domain-name=**********************"" ""--mailname=*******"" ""--password=jkd7Gj3"" ""--password=jkd7Gj3""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 11:13:44 AM mailmng.exe Error None 1 N/A ************************ "MEAOPO.Mailbox.GetMailbox failed
at (MailEnable::MailEnableMailName::MailEnableMailNam e line 92)
at execute console command --add-mailbox(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --add-mailbox ""--domain-name=**********************"" ""--mailname=*******"" ""--password=jkd7Gj3"" ""--password=jkd7Gj3""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 11:13:34 AM mailmng.exe Error None 1 N/A ************************ "MEAOPO.Mailbox.GetMailbox failed
at (MailEnable::MailEnableMailName::MailEnableMailNam e line 92)
at execute console command --add-mailbox(vconsoleapp::start line 128)
at execute ""c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"" --add-mailbox ""--domain-name=**********************"" ""--mailname=*******"" ""--password=jkd7Gj3"" ""--password=jjjjjjj""(vconsoleapp::run line 138)
Execute file name: c:\Program Files\SWsoft\Plesk\admin\bin\mailmng.exe"
1/30/2008 11:11:49 AM mailmng.exe Error

 

[tiramisu_]

- probably it's true that it is impossible to connect, try to check with telnet on 110 port;
- try to run mchk.exe utility in %plesk_bin% folder;
- check permissions with help of Reconfigurator;
- apply 8.2.0.1 patch;

 

[funky123]

thanks

Can i have guides on how to apply plesk 8.2.0.1
are there any known issues if anything will break off , any custom permssions being lost , mail configuration etc...

thanks in advance

 

[tiramisu_]

here some instructions,

no, it should not brake anything, just download and install, mail configuration should be ok, custom permissions may.

 

[funky123]

allright , thanks