• Debian 11 is approaching its end-of-life (vendor EOL date - August 31, 2026). Plesk Obsidian 18.0.80 will be the last release to support it.
    If you are running Plesk Obsidian on Debian 11, we recommend you upgrade those servers to Debian 12 using our dist-upgrade tool.
  • We plan to deprecate and remove the support for XML RPC protocol versions earlier than 1.6.9.1 in Plesk Obsidian 18.0.82. We strongly recommend that you update all existing integrations using earlier versions of the XML RPC protocol to comply with the version 1.6.9.1 specification.

Preview Site doesn't work on any domain

X

Xabier Bayon

Guest
Hi, after adding a new domain to the panel, I've tried to previewing it, the response has been that the page caonnot be found. I have checked the other domains in that host and have seen that the behaviour is the same.

Any advice???

Regards in advance.
 
please check that webmail.domain.com is resolved (domain.com - your domain name)

from linux box you can check:

avsokolov@fl1:~$ host webmail.domain.com
webmail.domain.com has address 72.5.54.115

from windows server, use nslookup system utility

if it is not resolved, check your dns server configuration in Plesk CP -> Domains -> domain.com -> DNS setting
you should have webmail.domain.com record.
 
It's not a DNS problem, the DNS records have not yet been changed to the new server, It is a server side problem, in another domains qith updated DNS records occurs the same problem.
 
i'm probably way off base here, but the only previewed pages that i've ever been able to see thru the control panel was the home page.
 
Hi, after adding a new domain to the panel, I've tried to previewing it, the response has been that the page caonnot be found. I have checked the other domains in that host and have seen that the behaviour is the same.

Any advice???

Regards in advance.

Hello Xabier Bayon,

Does your server work behind the NAT?
 
hello, Please check that default domain is set in Plesk -> Server->IP addresses->click on column under hosting , choose some domain and click on" set as default".
 
Back
Top