1. Please take a little time for this simple survey! Thank you for participating!
    Dismiss Notice
  2. Dear Pleskians, please read this carefully! New attachments and other rules Thank you!
    Dismiss Notice
  3. Dear Pleskians, I really hope that you will share your opinion in this Special topic for chatter about Plesk in the Clouds. Thank you!
    Dismiss Notice

Router, Firewall, Nat

Discussion in 'Plesk for Windows - 8.x and Older' started by stevejac, Oct 9, 2005.

  1. stevejac

    stevejac Guest

    0
     
    I just set up my Windows server behind a router, and hardware based firewall on a dmz port. When I request a site I get a default plesk page. I am able to log into the box,and set everything up. All ports are open, I am using this plesk server as the dns server. I have the zone info setup with my public ip address. This way the domains will resolve to a public ip, now if I change the zone info and use he private ip of the server the pages will show up until they get resolved my the root dns servers and now point to a private address.

    Is there a way to set plesk up to correct this problem?

    Please any input would be great.
    Thanks
    SJ
     
  2. vekna

    vekna Guest

    0
     
    I think you should assign all domains to private IP, but all DNS setting you should assign to public IP. Also you can create new DNS template to set these settings automatically.
     
Loading...