• Plesk Uservoice will be deprecated by October. Moving forward, all product feature requests and improvement suggestions will be managed through our new platform Plesk Productboard.
    To continue sharing your ideas and feedback, please visit features.plesk.com

Slave server -- failed to connect : timed out

N

nelteren

Guest
Hello,
I am trying to setup a secundairy dns server. It is not a plesk server but a plain FC4 server with bind 9.3.1 installed

On the slave:
/etc/named.conf

zone "net-products.nl" {
type slave;
file "net-products.nl.zone";
masters {212.204.247.201;};
};

on the master (plesk 8.1.1)
/etc/named.conf

zone "net-products.nl" {
type master;
file "net-products.nl";
allow-transfer {
212.204.247.201;
80.127.69.217;
common-allow-transfer;
};
};
and
acl common-allow-transfer {
80.127.69.217/24;
=================================================
the logs on the slave:

May 29 21:06:25 localhost named[26631]: zone net-products.nl/IN: Transfer started.
May 29 21:12:47 localhost named[26631]: transfer of 'net-products.nl/IN' from 212.204.247.201#53: failed to connect: timed out
May 29 21:12:47 localhost named[26631]: transfer of 'net-products.nl/IN' from 212.204.247.201#53: end of transfer
==================================================
There is a firewall fore the box, but tcp/udp port 53 is allowed from any
When I do a
tcpdump port 53
I see traffic
tcpdump port 53 and host ns2.net-products.nl
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
21:11:49.612687 IP net-products.nl.28560 > ws02.net-products.nl.domain: 47910 [1au] SOA? blaad.nl. (37)
21:11:49.612927 IP ws02.net-products.nl.domain > net-products.nl.28560: 47910* 1/2/3 SOA[|domain]
21:11:50.112935 IP net-products.nl.28560 > ws02.net-products.nl.domain: 44755 [1au] SOA? net-products.nl. (44)
21:11:50.113250 IP ws02.net-products.nl.domain > net-products.nl.28560: 44755* 1/2/3 SOA[|domain]
=====================================================
Q:
Is it possible that rndc must be configured on the slave?
Q:
Is there someone who has is working as I describe?
thanks for helping!
 
Back
Top