Facebook
Twitter
Since plesk 9 there seems to be a bug with postfix updates which breaks mailman list functionality.
Ever since I need to correct /etc/postix/master.cf after every update of plesk postfix as the line
mailman unix - n n - - pipe flags=Ru user=li...
gets replaced by
mailman unix - n n - - pipe flags=R user=li..
Explanation:
I have setup some lists with mailman under plesk9 and somewhere in the process there occurred a capitalization of the first letter of list names.
I don't know where the mismatch is buried but somewhere there exist entries like 'Listname' instead of 'listname'.
I see that the web Gui of mailman always show list names with capitalized first letters even though the real list name is all lower case so I suspect the mismatch originates in this area.
In most mailers mail addresses are case insensitive but not so with mailman and postfix unless you have the flags=Ru setting.
The error message I get if flags=Ru is not given is shown below.
Without flags=Ru it is not possible to send to [email protected] nor to [email protected]
It is a real nag that plesk updates always break my mailing list functionality.
Plesk updates should set flags=Ru as default or at least issue a notification about a changed master.cf
> <[email protected]>: Command died with status 1:
> "/usr/lib/plesk-9.0/postfix-mailman". Command output: post script, list not
> found: Listname
> Reporting-MTA: dns; ...
> X-Postfix-Queue-ID: EF00C185C1FD
> X-Postfix-Sender: rfc822; [email protected]
> Arrival-Date: Thu, 11 Oct 2012 23:54:24 +0200 (CEST)
>
> Final-Recipient: rfc822; [email protected]
> Original-Recipient: rfc822;[email protected]
> Action: failed
> Status: 5.3.0
> Diagnostic-Code: x-unix; post script, list not found: Listname
> Return-Path: <[email protected]>
> X-No-Auth: unauthenticated sender
> Received-SPF: none (no valid SPF record)
> X-No-Relay: not in my network
> Received: from ...
> by ...
> for <[email protected]>; Thu, 11 Oct 2012 23:54:24 +0200 (CEST)
> Received: from ...
> by ...
> for <[email protected]>; Thu, 11 Oct 2012 23:53:59 +0200 (CEST)
> From: "Test User" <[email protected]>
> Content-Type: multipart/alternative; boundary=Apple-Mail-6-170566548
> Subject: ...
> Date: Thu, 11 Oct 2012 23:53:57 +0200
> Message-Id: ...
> To: [email protected]
> Mime-Version: 1.0 (Apple Message framework v1085)
> X-Mailer: Apple Mail (2.1085)
Ever since I need to correct /etc/postix/master.cf after every update of plesk postfix as the line
mailman unix - n n - - pipe flags=Ru user=li...
gets replaced by
mailman unix - n n - - pipe flags=R user=li..
Explanation:
I have setup some lists with mailman under plesk9 and somewhere in the process there occurred a capitalization of the first letter of list names.
I don't know where the mismatch is buried but somewhere there exist entries like 'Listname' instead of 'listname'.
I see that the web Gui of mailman always show list names with capitalized first letters even though the real list name is all lower case so I suspect the mismatch originates in this area.
In most mailers mail addresses are case insensitive but not so with mailman and postfix unless you have the flags=Ru setting.
The error message I get if flags=Ru is not given is shown below.
Without flags=Ru it is not possible to send to [email protected] nor to [email protected]
It is a real nag that plesk updates always break my mailing list functionality.
Plesk updates should set flags=Ru as default or at least issue a notification about a changed master.cf
> <[email protected]>: Command died with status 1:
> "/usr/lib/plesk-9.0/postfix-mailman". Command output: post script, list not
> found: Listname
> Reporting-MTA: dns; ...
> X-Postfix-Queue-ID: EF00C185C1FD
> X-Postfix-Sender: rfc822; [email protected]
> Arrival-Date: Thu, 11 Oct 2012 23:54:24 +0200 (CEST)
>
> Final-Recipient: rfc822; [email protected]
> Original-Recipient: rfc822;[email protected]
> Action: failed
> Status: 5.3.0
> Diagnostic-Code: x-unix; post script, list not found: Listname
> Return-Path: <[email protected]>
> X-No-Auth: unauthenticated sender
> Received-SPF: none (no valid SPF record)
> X-No-Relay: not in my network
> Received: from ...
> by ...
> for <[email protected]>; Thu, 11 Oct 2012 23:54:24 +0200 (CEST)
> Received: from ...
> by ...
> for <[email protected]>; Thu, 11 Oct 2012 23:53:59 +0200 (CEST)
> From: "Test User" <[email protected]>
> Content-Type: multipart/alternative; boundary=Apple-Mail-6-170566548
> Subject: ...
> Date: Thu, 11 Oct 2012 23:53:57 +0200
> Message-Id: ...
> To: [email protected]
> Mime-Version: 1.0 (Apple Message framework v1085)
> X-Mailer: Apple Mail (2.1085)
