• The APS Catalog has been deprecated and removed from all Plesk Obsidian versions.
    Applications already installed from the APS Catalog will continue working. However, Plesk will no longer provide support for APS applications.
  • Please be aware: with the Plesk Obsidian 18.0.78 release, the support for the ngx_pagespeed.so module will be deprecated and removed from the sw-nginx package.

Plesk upgrade from 8.6 to 9.01 on CentOS 5 not working

E

Eric Way

Guest
When I run the updater to try to upgrade my Plesk control panel to 9.0.1 from 8.6.0, I get this error:

Warning: unresolved requires '/usr/bin/lp' from redhat-lsb-3.1-12.3.EL.el5.centos.i386 (s 0x8a83250 source=0x8735d18 P:27 R:154)
Warning: unresolved requires '/usr/bin/lpr' from redhat-lsb-3.1-12.3.EL.el5.centos.i386 (s 0x8a83250 source=0x8735d18 P:27 R:154)
A dependency problem is found: an older version of required package psa-9.0.1-cos5.build90090127.18.i586 (b 0x94f1e18 source=0x88019a0 P:3636 R:87) is installed (psa-8.6.0-rhel5.build86080722.01.i586 (s 0x916dc18 source=0x8735d18 P:3868 R:123)) . After upgrade procedure the dependency 'psa-security = 8.0' of package psa-watchdog-2.0.3-rhel5.build86080722.01.i586 (s 0x8a1c0f8 source=0x8735d18 P:273 R:38) will be unresolved. Try to add to removable list psa-watchdogFailed to check whether it is necessary to upgrade psa-watchdog-2.0.3-rhel5.build86080722.01.i586 (s 0x8a1c0f8 source=0x8735d18 P:273 R:38) along with upgrade of psa-8.6.0-rhel5.build86080722.01.i586 (s 0x916dc18 source=0x8735d18 P:3868 R:123) by psa-9.0.1-cos5.build90090127.18.i586 (b 0x94f1e18 source=0x88019a0 P:3636 R:87)Problem occured during searching indirect dependencies for package psa-9.0.1-cos5.build90090127.18.i586 (b 0x94f1e18 source=0x88019a0 P:3636 R:87)ERROR: Unable to proceed with the installation until the package psa-watchdog-2.0.3-rhel5.build86080722.01.i586 (s 0x8a1c0f8 source=0x8735d18 P:273 R:38) is removed from the system.
Not all packages were installed.
Please, resolve the above problem and try installing the packages again.
If you cannot resolve the problem on your own, contact product technical support for assistance.

^^^
I'm running centos 5. The lp and lpr commands appear to be installed and functioning on my system.
 
I see it mainly is winging about psa-watchdog.

So remove psa-watchdog then try the upgrade. Then you simply add in watchdog from the installer afterwards.
 
Back
Top