Question Problem after changing Plesk IP server

[SalvadorS]

Hello,

We changed the IP of Plesk in two debian servers following this article How to change the IP address of Plesk server?

After doing that we deleted the old IP server:

ip addr del x.x.x.x/24 dev eth0

But if the server is restarted, old IP appears. So, what we have to do to delete the old ip forever?

In one of the servers with graphical install we can go to configuration, net, and in the wired configuration we see the old IP. We changed that and problem was fixed but in the other we have only console and I don´t know what to do...

 

[SalvadorS]

When you change the IP you can see this configuration:

ip a

2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:a2:7d:ff brd ff:ff:ff:ff:ff:ff
inet x.x.x.x/24 brd x.x.x.x scope global eth0
inet y.y.y.y/26 scope global eth0:1
inet6 fe80::20c:29ff:fea2:7dff/64 scope link

So IP is added to eth0:1

When you deleted the old IP:

ip a

2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:a2:7d:ff brd ff:ff:ff:ff:ff:ff
inet y.y.y.y/26 scope global eth0:1
inet6 fe80::20c:29ff:fea2:7dff/64 scope link
valid_lft forever preferred_lft forever

And when you restart the server eth0 appears with the old ip...

 

[SalvadorS]

Hello,

I need help with this as IP isn´t correctly changed if you reboot the server...

 

[SalvadorS]

Hello,

I don´t know if anybody can help me with this issue, if anybody changed the plesk IP in a debian server and how to change the ip permanently

Thank you in advance