Problem to install Plesk- on Debian 3.1

[KnoPPerS]

Hello,
i would isntall Plesk on my Debian Server but the Autoinstaller abort with this failure:

Start Deb-based installation with apt
Reading Package Lists...
Building Dependency Tree...
libpam-plesk is already the newest version.
psa is already the newest version.
psa-horde is already the newest version.
psa-hotfix3 is already the newest version.
psa-imp is already the newest version.
The following NEW packages will be installed:
  psa-locale-de-de
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
5 not fully installed or removed.
Need to get 0B/1672kB of archives.
After unpacking 9904kB of additional disk space will be used.
Selecting previously deselected package psa-locale-de-de.
(Reading database ... 62164 files and directories currently installed.)
Unpacking psa-locale-de-de (from .../psa-locale-de-de_8.1-build81070325.19_all.deb) ...
Setting up psa (8.1.1-debian3.1.build81070322.16) ...
Setting the default locale
The default locale is set to en-US (ENGLISH, UNITED STATES)

mv: cannot stat `/opt/psa/tmp/psa.key': No such file or directory

ERROR while trying to install psa default key
Check the error reason(see log file: /tmp/psa_8.1.1_debian3.1.build81070322.16_installing.log), fix and try again

Aborting...

dpkg: error processing psa (--configure):
 subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of psa-horde:
 psa-horde depends on psa (>= 8.1.1); however:
  Package psa is not configured yet.
dpkg: error processing psa-horde (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of psa-hotfix3:
 psa-hotfix3 depends on psa-8.1.1; however:
  Package psa-8.1.1 is not installed.
  Package psa which provides psa-8.1.1 is not configured yet.
dpkg: error processing psa-hotfix3 (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of psa-imp:
 psa-imp depends on psa-horde; however:
  Package psa-horde is not configured yet.
dpkg: error processing psa-imp (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of psa-locale-de-de:
 psa-locale-de-de depends on psa (>= 8.1.0); however:
  Package psa is not configured yet.
dpkg: error processing psa-locale-de-de (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libpam-plesk:
 libpam-plesk depends on psa-8.1.1; however:
  Package psa-8.1.1 is not installed.
  Package psa which provides psa-8.1.1 is not configured yet.
dpkg: error processing libpam-plesk (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 psa
 psa-horde
 psa-hotfix3
 psa-imp
 psa-locale-de-de
 libpam-plesk
E: Sub-process /usr/bin/dpkg returned an error code (1)
ERROR: Install command execution failed
Errors just before:
- Can't execute package installation command

ERROR: Installation failed

Please help me

 

[KnoPPerS]

Okay i have reinstallt my Root!
Then I started the Autoinstaller.

done
 Checking for the group 'psaserv'...
 Trying to add supplementary group 'psaserv' for user 'psaftp'... done
done
 Checking for the group 'psaserv'...
 Trying to add supplementary group 'psaserv' for user 'psaadm'... done
done
 Checking for the group 'psacln'...
 Trying to add group 'psacln'... done

 Checking for the system groups and users necessary for Apache...
 Checking for the group 'www-data'...
 Group 'www-data' already exists

 Checking for the user 'www-data'...
 User 'www-data' already exists

 Checking that /bin/false registered as login shell...

Setting up python2.3 (2.3.5-3sarge2) ...

Setting up python (2.3.5-2) ...

Setting up psa-pylibplesk (8.1.1-debian3.1.build81070322.16) ...
Selecting previously deselected package libpam-plesk.
(Reading database ... 45999 files and directories currently installed.)
Unpacking libpam-plesk (from .../libpam-plesk_8.1.1-debian3.1.build81070322.16_i386.deb) ...
Selecting previously deselected package psa-horde.
Unpacking psa-horde (from .../psa-horde_3.1.3-debian3.1.build81070322.16_i386.deb) ...
Selecting previously deselected package psa-hotfix3.
Unpacking psa-hotfix3 (from .../psa-hotfix3_8.1.1-debian3.1.build81070423.14_i386.deb) ...
Selecting previously deselected package psa-imp.
Unpacking psa-imp (from .../psa-imp_4.1.3-debian3.1.build81070322.16_i386.deb) ...
Selecting previously deselected package psa-locale-de-de.
Unpacking psa-locale-de-de (from .../psa-locale-de-de_8.1-build81070325.19_all.deb) ...
Setting up libboost-filesystem1.32.0 (1.32.0-6) ...

Setting up libcurl3 (7.13.2-2sarge5) ...

Setting up libwww0 (5.4.0-9) ...

Setting up libxmlrpc-c3 (0.9.10-4) ...

Setting up psa-locale-base-en-us (8.1.1-debian3.1.build81070322.16) ...
Setting up psa-proftpd (1.3.0-debian3.1.build81070322.16) ...
 Checking that /bin/false registered as login shell...

 Checking for ftp home directory for 'clients' group...
 Trying to add '@psacln' to /etc/ftpchroot... done


Setting up psa-proftpd-inetd (1.3.0-debian3.1.build81070322.16) ...

Setting up psa-courier-imap (3.0.8-debian3.1.build81070322.16) ...
 Trying to register service courier-imap...  using /usr/sbin/update-rc.d
 Adding system startup for /etc/init.d/courier-imap ...
   /etc/rc0.d/K20courier-imap -> ../init.d/courier-imap
   /etc/rc1.d/K20courier-imap -> ../init.d/courier-imap
   /etc/rc6.d/K20courier-imap -> ../init.d/courier-imap
   /etc/rc2.d/S20courier-imap -> ../init.d/courier-imap
   /etc/rc3.d/S20courier-imap -> ../init.d/courier-imap
   /etc/rc4.d/S20courier-imap -> ../init.d/courier-imap
   /etc/rc5.d/S20courier-imap -> ../init.d/courier-imap
done
 Trying to comment out record for service imap...  no record for service imap found in the /etc/inetd.conf
 Trying to comment out record for service imap2...  no record for service imap2 found in the /etc/inetd.conf
 Trying to comment out record for service imap4...  no record for service imap4 found in the /etc/inetd.conf
 Trying to comment out record for service imaps...  no record for service imaps found in the /etc/inetd.conf
 Trying to comment out record for service pop3...  no record for service pop3 found in the /etc/inetd.conf
 Trying to comment out record for service pop-3...  no record for service pop-3 found in the /etc/inetd.conf
 Trying to comment out record for service pop3s...  no record for service pop3s found in the /etc/inetd.conf
Starting Courier-IMAP server:
   Starting imapd done
 generating-SSL-certificate...
   Starting imap-ssl done
   Starting pop3 done
 generating-SSL-certificate...   Starting pop3-ssl done


Setting up psa-qmail (1.03-debian3.1.build81070322.16) ...
 Trying to set up default qmail permissions... done

===> Installing Qmail server
 Configuring Qmail...
 Trying to comment out comsat service record from /etc/inetd.conf...  there is no comsat service record in /etc/inetd.conf
 Trying to  inetd daemon...  Trying to restart inetd daemon... done
 Trying to  inetd daemon...  Trying to restart inetd daemon... done
 Trying to generate SSL certificates for TLS sessions... Generating RSA private key, 512 bit long modulus
....++++++++++++
.................++++++++++++
e is 65537 (0x10001)

done
 Trying to register service qmail...  using /usr/sbin/update-rc.d
 Adding system startup for /etc/init.d/qmail ...
   /etc/rc0.d/K20qmail -> ../init.d/qmail
   /etc/rc1.d/K20qmail -> ../init.d/qmail
   /etc/rc6.d/K20qmail -> ../init.d/qmail
   /etc/rc2.d/S20qmail -> ../init.d/qmail
   /etc/rc3.d/S20qmail -> ../init.d/qmail
   /etc/rc4.d/S20qmail -> ../init.d/qmail
   /etc/rc5.d/S20qmail -> ../init.d/qmail
done
 Trying to start Qmail services... done
 Trying to stop Qmail services... done
 Trying to set up default mail handlers permissions...  Trying to register service qmail...  using /usr/sbin/update-rc.d
 System startup links for /etc/init.d/qmail already exist.
done

Setting up psa-courier-imap-add (8.1.1-debian3.1.build81070322.16) ...
Stopping Courier-IMAP server:
   Stopping imap done
   Stopping imap-ssl done
   Stopping pop3 done
   Stopping pop3-ssl done

Starting Courier-IMAP server:
   Starting imapd done
   Starting imap-ssl done
   Starting pop3 done
   Starting pop3-ssl done


Setting up libxml2 (2.6.16-7) ...

Setting up libdevel-symdump-perl (2.03-3) ...
Setting up libperl5.8 (5.8.4-8sarge5) ...

Setting up libapache2-mod-perl2 (1.999.21-1) ...
Module perl installed; run /etc/init.d/apache2 force-reload to enable.

Setting up awstats (6.4-1sarge3) ...

Setting up python2.3-libxml2 (2.6.16-7) ...

Setting up python-libxml2 (2.6.16-7) ...
Setting up libreadline5 (5.0-10) ...

Setting up libusb-0.1-4 (0.1.10a-9.sarge.1) ...

Setting up gnupg (1.4.1-1.sarge7) ...
Setting up libxslt1.1 (1.1.12-8) ...

Setting up php4-cli (4.3.10-20) ...

Setting up php4-domxml (4.3.10-20) ...

Setting up php4-curl (4.3.10-20) ...

Setting up psa-php4-configurator (1.1.0-debian3.1.build81070322.16) ...
===> configuring php4 using /etc/php4/apache2/php.ini file
 Trying to set memory limit to 32M... done
 Trying to add '.' to 'include_path'... Unable to find 'include_path' variable in /etc/php4/apache2/php.ini
Adding new entry
done
 Trying to set 'short_open_tag' to On... done
 Trying to set 'file_uploads' to On... done
 Trying to set 'safe_mode' to On... done
===> configuring php4 using /etc/php4/cli/php.ini file
 Trying to set memory limit to 32M... done
 Trying to add '.' to 'include_path'... Unable to find 'include_path' variable in /etc/php4/cli/php.ini
Adding new entry
done
 Trying to set 'short_open_tag' to On... done
 Trying to set 'file_uploads' to On... done
 Trying to set 'safe_mode' to On... done

Setting up psa-api (8.1.1-debian3.1.build81070404.14) ...
Setting up psa (8.1.1-debian3.1.build81070322.16) ...
Setting the default locale
The default locale is set to en-US (ENGLISH, UNITED STATES)
config updated
===> Updated /etc/psa/psa.conf

Installing /etc/psa/psa.key.

===> Installing rbash
 Checking that /bin/rbash registered as login shell...
 /bin/rbash is already registered as login shell

 Trying to start MySQL server... done
 Trying to establish test connection...
ERROR while trying to establish test connection
Check the error reason(see log file: /tmp/psa_8.1.1_debian3.1.build81070322.16_installing.log), fix and try again

Aborting...

dpkg: error processing psa (--configure):
 subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of psa-horde:
 psa-horde depends on psa (>= 8.1.1); however:
  Package psa is not configured yet.
dpkg: error processing psa-horde (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of psa-hotfix3:
 psa-hotfix3 depends on psa-8.1.1; however:
  Package psa-8.1.1 is not installed.
  Package psa which provides psa-8.1.1 is not configured yet.
dpkg: error processing psa-hotfix3 (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of psa-imp:
 psa-imp depends on psa-horde; however:
  Package psa-horde is not configured yet.
dpkg: error processing psa-imp (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of psa-locale-de-de:
 psa-locale-de-de depends on psa (>= 8.1.0); however:
  Package psa is not configured yet.
dpkg: error processing psa-locale-de-de (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of libpam-plesk:
 libpam-plesk depends on psa-8.1.1; however:
  Package psa-8.1.1 is not installed.
  Package psa which provides psa-8.1.1 is not configured yet.
dpkg: error processing libpam-plesk (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 psa
 psa-horde
 psa-hotfix3
 psa-imp
 psa-locale-de-de
 libpam-plesk
E: Sub-process /usr/bin/dpkg returned an error code (1)
ERROR: Install command execution failed
Errors just before:
- Can't execute package installation command

ERROR: Installation failed
piripiri014:~/plesk#

please help

 

[KnoPPerS]

can't anyone help me?

 

[kassah]

before you start your install type:
ln -s /etc/init.d/openbsd-inetd /etc/init.d/inetd

This is a known bug that will be fixed in 8.2