1. Please take a little time for this simple survey! Thank you for participating!
    Dismiss Notice
  2. Dear Pleskians, please read this carefully! New attachments and other rules Thank you!
    Dismiss Notice

Site Preview not working without SSL??

Discussion in 'Plesk for Windows - 8.x and Older' started by gman04, Sep 27, 2004.

  1. gman04

    gman04 Guest

    0
     
    Website setup w/Plesk requiring Authentication???

    Just set up a new site in Plesk 7. The old site is on another server (6.5) and we're moving to this one.

    Before moving DNS over, need to preview to make sure everything is working correctly.... however preview is only working with SSL
    (i.e. https://ipaddress/domainname WORKS but http://ipaddress/domainname ASKS FOR USER/PASS).

    Any idea what I have set wrong? Didn't have this problem on the Plesk 6.5 server.....

    Thanks!
     
  2. gman04

    gman04 Guest

    0
     
    (bump) ... nobody's run into this before? Perhaps I have some permissions set wrong somewhere?
     
  3. Mertz

    Mertz Guest

    0
     
    I may be mistaken but in my experience DNS for the domain has to be pointing to the 7.0 server for the site preview function to work.

    If you're using shared hosting then you won't see your site unless you have DNS pointing to the new server.

    If you're using exclusive hosting then you should be able to go to http://ipaddress and see the site.
     
  4. gman04

    gman04 Guest

    0
     
    Yeah, I figured that - so I made it an exclusive IP for that domain ... I can't move the DNS over 'til we test it and everything works properly....

    However, even on EXCLUSIVE IP for that domain - going to http://ipaddress OR http://ipaddress/domainname -- it's still asking for a username/password??? :confused: (but if you use SSL - https://ipaddress it works fine :confused: :confused:
     
  5. gman04

    gman04 Guest

    0
     
    anybody?
     
  6. sonics

    sonics Regular Pleskian

    26
    23%
    Joined:
    Jan 4, 2004
    Messages:
    168
    Likes Received:
    1
    Location:
    Switzerland
    It's a mistake in the plesk 7.

    on some domains you will have that problem.
    the solution is:


    - for that domain go to the IIS and properties on that domain
    then security and the give the ananymous user IIS...... a password.

    - now go to the windows user manager and set exaclty the same password to the same IIS.. ano User as in the IIS.

    Then it work.

    If you want that the http://ipaddress/domain.com also works
    you have also to set that passwort at the default page to the
    virtual directory of that desired domain.

    i hope that will help. sorry for my english.

    regards chris from switzerland
     
Loading...