• We value your experience with Plesk during 2025
    Plesk strives to perform even better in 2026. To help us improve further, please answer a few questions about your experience with Plesk Obsidian 2025.
    Please take this short survey:

    https://survey.webpros.com/
  • On Plesk for Linux mod_status is disabled on upgrades to improve Apache security.
    This is a one-time operation that occurs during an upgrade. You can manually enable mod_status later if needed.

Sitebuilder 3.0.2 - Add Image - paths incorrect

teckna

Basic Pleskian
When you add an image, sometimes the image cannot be found as the path it picks up is invlaid. These are loaded from a local PC and the image name is recognised but when selected the path is wrong.

The path of the correct images is: attachments/Image/tempOnyx3280_Header.jpg

The path it sometimes collects is:
/sites/f0/f0c373134b65a2c173a48b81214db535/attachments/Image/tick.gif

Sometimes it works, sometimes it doesnt !


-----------------------
Feel free to try http://sb.teckna.com and create a site, you never get through a complete session without the error...

If you do creat a trial site .. please leave text in the home page, so we can filter the forum budies sites out..

ta

Andy
 
Back
Top