1. Please take a little time for this simple survey! Thank you for participating!
    Dismiss Notice
  2. Dear Pleskians, please read this carefully! New attachments and other rules Thank you!
    Dismiss Notice
  3. Dear Pleskians, I really hope that you will share your opinion in this Special topic for chatter about Plesk in the Clouds. Thank you!
    Dismiss Notice

unable to map ip

Discussion in 'Plesk for Linux - 8.x and Older' started by tspatrick, Jan 18, 2005.

  1. tspatrick

    tspatrick Guest

    0
     
    Hello:

    I am receiving the following error when performing a psarestore:

    The IP's mapping procedure has been started ...

    207.44.184.76 -> eth0: 207.44.184.76 255.255.254.0 ### shared
    Unable to map ip address 207.44.185.109: target ip is missing in map.

    Below is what my Map IP File looks like:

    207.44.184.76 -> eth0: 207.44.184.76 255.255.254.0
    207.44.185.105 -> eth0: 207.44.185.105 255.255.254.0
    207.44.185.106 -> eth0: 207.44.185.106 255.255.254.0
    207.44.185.107 -> eth0: 207.44.185.107 255.255.254.0
    207.44.185.108 -> eth0: 207.44.185.108 255.255.254.0
    207.44.185.109 -> eth0: 207.44.185.109 255.255.254.0
    207.44.185.110 -> eth0: 207.44.185.110 255.255.254.0

    Please help need to restore immediately.
     
  2. Snapdragon

    Snapdragon Guest

    0
     
    Is your subnet mask really 255.255.254.0 and not 255.255.255.0?
     
Loading...