Make error installing Memcached 72 (Debian 9)

[NicolasUni]

Dear Pleskians,

I encounter an error while trying to install Memcached 72 on Onyx with Debian 9 ( config.status: executing libtool commands running: make sh: 1: make: not found ERROR: `make' failed). Would you be enough kind helping me to solve it ?

Best regards,

Nicolas

root@m11112:~# apt install autoconf automake gcc libmemcached-dev libhashkit-dev pkg-config plesk-php72-dev zlib1g-dev
[…]
23 upgraded, 37 newly installed, 0 to remove and 126 not upgraded.
Need to get 35.7 MB of archives.
After this operation, 110 MB of additional disk space will be used.
Do you want to continue? [Y/n] Y
[…]
libmemcached directory [no] : no
building in /tmp/pear-build-root91mqzM/memcached-3.0.4
running: /tmp/memcached/configure --with-php-config=/opt/plesk/php/7.2/bin/php-config --with-libmemcached-dir=no
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for a sed that does not truncate output... /bin/sed
checking for cc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking how to run the C preprocessor... cc -E
checking for icc... no
checking for suncc... no
checking whether cc understands -c and -o together... yes
checking for system library directory... lib
checking if compiler supports -R... no
checking if compiler supports -Wl,-rpath,... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for PHP prefix... /opt/plesk/php/7.2
checking for PHP includes... -I/opt/plesk/php/7.2/include/php -I/opt/plesk/php/7.2/include/php/main -I/opt/plesk/php/7.2/include/php/TSRM -I/opt/plesk/php/7.2/include/php/Zend -I/opt/plesk/php/7.2/include/php/ext -I/opt/plesk/php/7.2/include/php/ext/date/lib
checking for PHP extension directory... /opt/plesk/php/7.2/lib/php/modules
checking for PHP installed headers prefix... /opt/plesk/php/7.2/include/php
checking if debug is enabled... no
checking if zts is enabled... no
checking for re2c... no
configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers.
checking for gawk... gawk
checking whether to enable memcached support... yes, shared
checking for libmemcached... yes, shared
checking whether to enable memcached session handler support... yes
checking whether to enable memcached igbinary serializer support... no
checking whether to enable memcached json serializer support... no
checking whether to enable memcached msgpack serializer support... no
checking whether to enable memcached sasl support... yes
checking whether to enable memcached protocol support... no
checking whether to use system FastLZ bibrary... no
checking for ZLIB... yes, shared
checking for pkg-config... /usr/bin/pkg-config
checking for zlib location... /usr
checking for session includes... /opt/plesk/php/7.2/include/php
checking for memcached session support... enabled
checking for memcached igbinary support... disabled
checking for memcached msgpack support... disabled
checking for libmemcached location... found version 1.0.18, under /usr
checking whether to enable sasl support... yes
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking sasl/sasl.h usability... yes
checking sasl/sasl.h presence... yes
checking for sasl/sasl.h... yes
checking whether libmemcached supports sasl... yes
checking for sasl_client_init in -lsasl2... yes
checking whether memcached_exist is defined... yes
checking for memcached protocol support... disabled
checking how to print strings... printf
checking for a sed that does not truncate output... (cached) /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by cc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking for gawk... (cached) gawk
checking command to parse /usr/bin/nm -B output from cc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if cc supports -fno-rtti -fno-exceptions... no
checking for cc option to produce PIC... -fPIC -DPIC
checking if cc PIC flag -fPIC -DPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.o... (cached) yes
checking whether the cc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating ./config.status
config.status: creating config.h
config.status: executing libtool commands
running: make
sh: 1: make: not found
ERROR: `make' failed
root@m11112:~# echo "extension=memcached.so" > /opt/plesk/php/7.2/etc/php.d/memcached.ini
root@m11112:~# plesk bin php_handler --reread
The information about PHP handlers was successfully updated.

 

[IgorG]

sh: 1: make: not found
ERROR: `make' failed

Just install it with

# apt-get install make

 

[NicolasUni]

Spasibo Igor, I am going to try

 

[NicolasUni]

It works ! Spasiba ichio

 

[NicolasUni]

Everything looks fine. Memcached appears in php.info

and

root@ :~# /opt/plesk/php/7.2/bin/php -i | grep "memcached support"
memcached support => enabled

but the file (/etc/sysconfig/memcached) does not exit in (/etc/sysconfig/).

Any idea to solve this issue ?

Regards,

Nicolas

 

[Monty]

/etc/sysconfig is mostly used by Redhat-based systems such as RHEL/Fedora/CentOS.
You are on Debian 9, so you should have a /etc/memcached.conf and/or /etc/default/memcached

 

[NicolasUni]

Hello Monty the Cat,

Neither (/etc/memcached.conf ; /etc/default/memcached). Do you think that should try a reinstallation of memcached ?

 

[NicolasUni]

Weird…

root@:~# service memcached status

Unit memcached.service could not be found.

 

[Monty]

Ah wait, you probaby only installed the memcached PHP extension. You'll also need the memcached package (the actual memcached server) for your system.

This should do the trick:
# apt install memcached

 

[NicolasUni]

Do I rather use :

# apt install memcached

or
once again :

/opt/plesk/php/7.2/bin/pecl install memcached

?

 

[Monty]

You already installed the PECL memcached package, so no need to install it again. Now you're missing the memcached server, this one must be installed with apt.

There are two components in a memcached setup: The memcached client (in this case PHP, using the PECL package) and the memcached server (where the client is connecting to to store the data in the cache).

 

[NicolasUni]

Monty the Cat, I am immediately going to drink a bowl of milk to your health!