Issue Installation Stuck on Windows Server 2019

[signal.tom]

Hello All,

This is the first time I'm installing Plesk, however its currently stuck on "Installing MailEnable Standard Edition..." and has been since roughly 2 pm yesterday.
Looking in both the start menu and Programs and Features, it would have looked to have installed the MailEnable software.

I have checked the CPU / RAM usage and its just ticking over it would seem.
The server is a VM running on VMware ESXi 6.7, with 8 cores assigned to the CPU, and 16 GB RAM. Plenty of space too.
I selected Full Installation as well for Plesk.

Would any one have any advise?

Thanks, Tom

 

[Hex]

If the installation is more than an hour .. kill everything or execute this command, maybe you lost a session if you use web installer

plesk bin admin --enable-access-domain <pleskhostname.domain.tld>

or use direct IP access with 8443 port

Installing Plesk for Windows in One Click

One-click installation is a fast and hassle-free way of getting a Plesk server with default configuration up and runn...

docs.plesk.com

The installation will proceed automatically, taking between thirty minutes and an hour (on average). The installer will download the latest stable Plesk release, install it with the default set of components and features designed to suit the needs of the majority of users, and apply all available patches and updates for maximum security and performance.

Do not worry that you are missing out on any Plesk features this way - you can add or remove Plesk components later. However, if you would like to have control over what components are installed, take a look at installing via console or the web GUI.

You can exclude some components or just use the recommended install, then add or remove as you need.

I recommend using console installation

Installing Plesk for Windows Using Installer Console

If you want to select specific Plesk components for installation, you can install Plesk using the interactive console...

docs.plesk.com

 

[StevenKnight]

Hello All,

This is the first time I'm installing Plesk, however its currently stuck on "Installing MailEnable Standard Edition..." and has been since roughly 2 pm yesterday.
Looking in both the start menu and Programs and Features, it would have looked to have mygroundbizaccount installed the MailEnable software.

I have checked the CPU / RAM usage and its just ticking over it would seem.
The server is a VM running on VMware ESXi 6.7, with 8 cores assigned to the CPU, and 16 GB RAM. Plenty of space too.
I selected Full Installation as well for Plesk.

Would any one have any advise?

Thanks, Tom

the questions myself too.

 

[Hex]

No issues with my testing servers. It was smooth and quick 12Min with 1CPU and 2G RAM.

Try to go back to http://localhost:8447/summary.html and see what options you have.
Or remove the MailEnable component from the list (Untick the checkbox) and try to install again (on clean server)

 

[beefy.fifi]

Recently I tried to install Plesk on a VM with 8 GB RAM, 256 GB SDD and a i7 6700k. After 2 hours of pain the VM machine crashed and after that the whole pc crashed (The famous BLUESCREEN) After that crash the network connection disappeared, nothing at all. Thanks GOD that I found the problem. It was the network interface controller, (PCie Intel PRO 1000 PT Quad). The drivers were too old and crashed everything. If you have the same problem... I found the best solution. It is a driver updater that I found here. Free driver updater: Top-15 list | Thinkmobiles.Check it out, I am really happy with it .

 

[Siham43]

[QUOTE = "Hextrator, poste: 875674, membre: 188299"]
Si l'installation dure plus d'une heure .. tuez tout ou exécutez cette commande, vous avez peut-être perdu une session si vous utilisez le programme d'installation Web

 plesk bin admin --enable-access-domain <pleskhostname.domain.tld> [/ CODE]
ou utiliser un accès IP direct avec le port 8443

[URL unfurl = "true"] https://docs.plesk.com/en-US/obsidian/deployment-guide/plesk-installation-and-upgrade-on-single-server/1click-plesk-installation/installing- plesk-for-windows-in-one-click.76448 / [URL='http://https%3A%20//www.rachat-de-credit-simulation.com/comparatif']Rachat de crédit meilleurs taux de crédit crédit [/URL]

Vous pouvez exclure certains composants ou simplement utiliser l'installation recommandée, puis ajouter ou supprimer selon vos besoins.

Je recommande d'utiliser l'installation de la console

[URL unfurl = "true"] https://docs.plesk.com/en-US/obsidian/deployment-guide/plesk-installation-and-upgrade-on-single-server/installing-plesk-using-installer-- - console / installation-plesk-for-windows-using-installer-console.76449 / [/ URL]
[/ CITATION] Oui je suis d'accord j'ai aussi utilisé cette installation [/ CODE]

 

[IgorG]

Si l'installation dure plus d'une heure .. tuez tout ou exécutez cette commande, vous avez peut-être perdu une session si vous utilisez le programme d'installation Web

Please use the default language of this forum - English. Next time your message will be removed.