Issue Magento 2.1 installation

[kojot]

Hi,

because you suggest me few times that is better way to install Magento via Plesk's APP, I'll try it now.
Every time I had problem to install it. And now again.
I got error

Error: The following error has occurred during the installation of application: Installation of magento at http://mapmag.px90.info/ failed. Non-zero exit status returned by script. Output stream: 'PHP Fatal error: Uncaught exception 'InvalidArgumentException' with message 'Parameter validation failed' in /var/www/vhosts/px90.info/mapmag.px90.info/setup/src/Magento/Setup/Console/Command/InstallCommand.php:150 Stack trace: #0 /var/www/vhosts/px90.info/mapmag.px90.info/vendor/symfony/console/Symfony/Component/Console/Command/Command.php(236): Magento\Setup\Console\Command\InstallCommand->initialize(Object(Symfony\Component\Console\Input\ArgvInput), Object(Symfony\Component\Console\Output\ConsoleOutput)) #1 /var/www/vhosts/px90.info/mapmag.px90.info/vendor/symfony/console/Symfony/Component/Console/Application.php(874): Symfony\Component\Console\Command\Command->run(Object(Symfony\Component\Console\Input\ArgvInput), Object(Symfony\Component\Console\Output\ConsoleOutput)) #2 /var/www/vhosts/px90.info/mapmag.px90.info/vendor/symfony/console/Symfony/Component/Console/Application.php(195): Symfony\Component\Console\Application->doRunCommand(Object(Magento\Setup\Console\Command\InstallCommand), Object(Symfony\Component\Console\I in /var/www/vhosts/px90.info/mapmag.px90.info/setup/src/Magento/Setup/Console/Command/InstallCommand.php on line 150 '. Error stream: 'PHP Fatal error: Uncaught exception 'InvalidArgumentException' with message 'Parameter validation failed' in /var/www/vhosts/px90.info/mapmag.px90.info/setup/src/Magento/Setup/Console/Command/InstallCommand.php:150 Stack trace: #0 /var/www/vhosts/px90.info/mapmag.px90.info/vendor/symfony/console/Symfony/Component/Console/Command/Command.php(236): Magento\Setup\Console\Command\InstallCommand->initialize(Object(Symfony\Component\Console\Input\ArgvInput), Object(Symfony\Component\Console\Output\ConsoleOutput)) #1 /var/www/vhosts/px90.info/mapmag.px90.info/vendor/symfony/console/Symfony/Component/Console/Application.php(874): Symfony\Component\Console\Command\Command->run(Object(Symfony\Component\Console\Input\ArgvInput), Object(Symfony\Component\Console\Output\ConsoleOutput)) #2 /var/www/vhosts/px90.info/mapmag.px90.info/vendor/symfony/console/Symfony/Component/Console/Application.php(195): Symfony\Component\Console\Application->doRunCommand(Object(Magento\Setup\Console\Command\InstallCommand), Object(Symfony\Component\Console\I in /var/www/vhosts/px90.info/mapmag.px90.info/setup/src/Magento/Setup/Console/Command/InstallCommand.php on line 150 '.

PHP settings for this subdomain are:

PHP 5.6.25 by OS Vendor (updated yesterday from 5.4.36) - FastCGI
memory_limit: 1024M
max_execution_time: 1800
max_input_time: 1800
post_max_size: 16M
upload_max_filesize: 128M

Other settings are default.

What could be a problem?

 

[kojot]

Hi, I searched that someone had similar problem with CentOS, and solution was

chmod 1733 /var/lib/php/session\
root:root /var/lib/php/session

I'm on Debian, and path is little different, but I checked it, and it is already root:root and 1733

 

[bulent]

Hi, I searched that someone had similar problem with CentOS, and solution was

I'm on Debian, and path is little different, but I checked it, and it is already root:root and 1733

This was when you have permission issues.

My advice will to use official plesk aps installer.

Standard magento 2 installation causes too much permission issues. I have tried several times and always somewhere something was wrong.

 

[bulent]

Sorry, didn't read the previous post, my mistake.

Instead FastCGI try PHP FPM.

 

[kojot]

Hi, I suppose that I need to chose php fpm from here, but I don't have installed it.



Can you tell me how to install PHP FPM?

 

[bulent]

I have it with default installation with centos 7
For debian,I don't know how it will be possible.

 

[kojot]

I tried with CGI, and PHP 7.09, and all other versions that I have, but always the same error...

 

[UFHH01]

Hi CoyoteKG,

Hi, I suppose that I need to chose php fpm from here, but I don't have installed it.

Did you at least try to install all necessary modules, so that PHP-FPM is available for your OS - vendor - version?

Home > Tools & Settings > Updates and Upgrades
​

In addition, for Debian/Ubuntu - based - systems, you should consider to install "php-fpm" with the command:

aptitude install php5-fpm​

Additional note:
Due to the case, that I reread all your recent posts here in the forum, regarding "Magento" and your issues with it, I would suggest that you consider to hire a linux - system-administrator to solve your issues/problems/failures with "Magento" - it really has been a very, very long time now, that you experience different sorts of issues/failures/problems, which you didn't seem to solve with the help of the Plesk - community.

 

[kojot]

Hi UFHH01,

thx for suggestion .
Unfortunately I'm too much stubborn and persistent to give up.

I found in "Updates and Upgrades" option "PHP-FPM support from OS vendor"
I did not saw that option on other server that we have...

I installed it, and i do

plesk bin php_handler --reread

and

root@server ~ # plesk bin php_handler --list
                  id:        display name:  full version:  version:    type:                         cgi-bin:                    php-cli:                        php.ini:  custom:  status:
                  cgi  5.6.25 by OS vendor         5.6.25       5.6      cgi                /usr/bin/php5-cgi               /usr/bin/php5           /etc/php5/cgi/php.ini    false  enabled
              fastcgi  5.6.25 by OS vendor         5.6.25       5.6  fastcgi                /usr/bin/php5-cgi               /usr/bin/php5           /etc/php5/cgi/php.ini    false  enabled
                  fpm  5.6.25 by OS vendor         5.6.25       5.6      fpm               /usr/sbin/php5-fpm               /usr/bin/php5           /etc/php5/fpm/php.ini    false  enabled
               module  5.6.25 by OS vendor         5.6.25       5.6   module                /usr/bin/php5-cgi               /usr/bin/php5       /etc/php5/apache2/php.ini    false  enabled
      plesk-php56-cgi               5.6.24         5.6.24       5.6      cgi   /opt/plesk/php/5.6/bin/php-cgi  /opt/plesk/php/5.6/bin/php  /opt/plesk/php/5.6/etc/php.ini     true disabled
  plesk-php56-fastcgi               5.6.24         5.6.24       5.6  fastcgi   /opt/plesk/php/5.6/bin/php-cgi  /opt/plesk/php/5.6/bin/php  /opt/plesk/php/5.6/etc/php.ini     true  enabled
      plesk-php56-fpm               5.6.24         5.6.24       5.6      fpm  /opt/plesk/php/5.6/sbin/php-fpm  /opt/plesk/php/5.6/bin/php  /opt/plesk/php/5.6/etc/php.ini     true  enabled
      plesk-php70-cgi                7.0.9          7.0.9       7.0      cgi   /opt/plesk/php/7.0/bin/php-cgi  /opt/plesk/php/7.0/bin/php  /opt/plesk/php/7.0/etc/php.ini     true disabled
  plesk-php70-fastcgi                7.0.9          7.0.9       7.0  fastcgi   /opt/plesk/php/7.0/bin/php-cgi  /opt/plesk/php/7.0/bin/php  /opt/plesk/php/7.0/etc/php.ini     true  enabled
      plesk-php70-fpm                7.0.9          7.0.9       7.0      fpm  /opt/plesk/php/7.0/sbin/php-fpm  /opt/plesk/php/7.0/bin/php  /opt/plesk/php/7.0/etc/php.ini     true  enabled

And I see it on the list, but there is no that option in Plesk panel to chose for domain.


What I need to do to to plesk show fpm?