plesk 9 to 9.0.1 issue using update

[dvdpa]

After running the updater via the GUI I have a strange problem. Several of the 9.01 components did install but the base package is still at 9.0.0 I have verified this. I have re-run the updater and I get a success report but after review is show that it did not install the update because its already installed.

skip package 'plesk-base-9.0.1-rhel4.build90090127.18.i586 (b 0x9239bd8 source=0x91a8750 P:0 R:0)' from component base - there is same or newer version of this package is installed (in system plesk-base-9.0.1-rhel4.build90090127.18.i586 (s 0x917d778 source=0x911b1e8 P:0 R:0))

Problem is that the component info still shows 9.0.0 and the update is still indicating it has not been updated.....

Where do I go from here?

Chuck

 

[Brujo]

i suggest to update from comandline with the autoinstaller tool insteed the gui

/usr/local/psa/admin/bin/autoinstaller

 

[dgersh]

Yeah I'm having a similar problem. I apparently got 1/2 way updated, now my versions are all out of whack and the things not installed are complaining about md5 checksum mismatch.

Any tips on using the command line autoinstaller?

-David