Facebook
Twitter
It seems you have those 500 designs ready for 4.5, instead of the previous technical issue.
We tried to re-run the upgrade from Site Builder 4.0 to 4.5 in trial server, but we encounter the following -
Please help.
We tried to re-run the upgrade from Site Builder 4.0 to 4.5 in trial server, but we encounter the following -
[root@sb4test2 ~]# ./parallels_installer_v3.3.2_build080710.09_os_CentOS_5_i386
Welcome to the Parallels Product Installation Wizard
===============================================================================
Plesk(tm) software simplifies the configuration and management of UNIX- and
Linux-based web servers. Feel the power of Plesk(tm).
Parallels has developed this installer to assist you with installing or upgrading
the Plesk(tm) software onto your server.
IMPORTANT NOTES:
New installations of Plesk(tm) should be performed on clean
servers only; Specifically only the Operating System with the Networking option
should be installed for new installations.
This installer can also be used to upgrade existing product installations to the
latest versions. We highly recommend that a backup of the system be performed
prior to upgrading your software.
Parallels, Inc. will not be held liable for damages as a result of installing Plesk(tm)
on a server with anything other than a fresh installation of the operating
system for which the Plesk(tm) installation was intended. By using this installer you
agree to the terms and conditions as described on
http://www.parallels.com/en/company/terms/ and those of the Plesk End Users License
Agreement.
N) Next page; Q) Cancel installing
Select action [N]:
Select Plesk software source
===============================================================================
You can install Plesk in one of the following ways:
* Local Media
* Plesk server
* Other network site
Current settings:
Install Plesk from Plesk server
Install required system packages from Plesk server
Store downloaded files to: /root/parallels
N) Next page; P) Go back; Q) Cancel installing
S) Change source; T) Change target directory;
Select an action and press ENTER [N]:
HTTP Proxy Setup
===============================================================================
If you are behind a firewall and use a HTTP proxy, you should specify the proxy server below.
If your proxy requires authentication, select "Use authentication"
and specify the username and password
Current settings:
Do not use proxy.
N) Next page; P) Go back; Q) Cancel installing;
S) Select proxy server; A) Use authentication;
Select the required action [N]:
Checking for installed packages...
Downloading the file products.inf3: 100% done.
Downloading the file plesk.inf3: 10%..24%..35%..40%..51%..61%..72%..83%..91%..100% done.
Downloading the file sitebuilder.inf3: 20%..40%..60%..100% done.
Downloading the file sso.inf3: 13%..40%..54%..67%..94%..100% done.
Select the desired products and their versions
===============================================================================
The following product versions are available:
1. [ ] Plesk Control Panel
2. [*] Sitebuilder
3. (*) Sitebuilder 4.5.0
4. [ ] SSO
N) Go to the next page; P) Go the previous page; Q) Cancel installing
To select a version, type the respective number;
Select action [N]:
You have the product version Sitebuilder 4.0.0 installed.
Do you want to upgrade it?
Y) Yes; N) No
Type Y for yes, or N for No: Y
Downloading the file SiteBuilder/SiteBuilder_4.5.0/sitebuilder-4.5.0-cos5-i386.inf3: 10%..20%..31%..41%..52%..60%..73%..83%..90%..100% done.
Virtuozzo was detected. Trying to connect to VZAgent...Warning! Failed to connect to VZAgent: open: No such file or directory
Detecting installed product components.
Primary components list
===============================================================================
Show components for the product:
1. (*) Sitebuilder
Please select the components of Sitebuilder you want to install:
2. * SiteBuilder packages
3. [*] SiteBuilder modules
4. [*] SiteBuilder localization files
5. [*] SiteBuilder design templates
N) Next page; P) Go back; Q) Cancel installing;
A) Select all; D) Deselect all;
To select or deselect a component, enter its number;
Type a number or a character of desired action [N]:
Retrieving information about the installed packages...
Downloading the file SiteBuilder/SiteBuilder_4.5.0/dist-rpm-CentOS-5-i386/build-4.5.0-cos5-i386.hdr.gz: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file SiteBuilder/SiteBuilder_4.5.0/update-rpm-CentOS-5-i386/update-4.5.0-cos5-i386.hdr.gz: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% done.
Downloading the file SiteBuilder/SiteBuilder_4.5.0/thirdparty-rpm-CentOS-5-i386/thirdparty-4.5.0-cos5-i386.hdr.gz: 14%..29%..44%..74%..100% done.
Determining the packages that need to be installed.
ERROR: The auto-installer's configuration files .inf3 and .hdr.gz contain lists of packages that do not match.
Not all packages were installed.
Please, contact product technical support.
[root@sb4test2 ~]#
Please help.
