Update of plesk-mail-pc-driver_12.5.30 hangs

[ehrenwert]

Hello,

at the moment I mention that the upgrade of the package
plesk-mail-pc-driver_12.5.30 hangs for hours:

Paketaktualisierung (Upgrade) wird berechnet... Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:

libaudio2 libice6 libmng1 libqtcore4 libqtgui4 libsm6 libxt6 qtcore4-l10n x11-common

Verwenden Sie »apt-get autoremove«, um sie zu entfernen.

Fertig

Die folgenden Pakete werden aktualisiert (Upgrade):

plesk-l10n plesk-mail-pc-driver plesk-php70 plesk-php70-bcmath plesk-php70-cli plesk-php70-dba plesk-php70-enchant plesk-php70-fpm plesk-php70-gd plesk-php70-imap

plesk-php70-intl plesk-php70-ldap plesk-php70-mbstring plesk-php70-mcrypt plesk-php70-mysql plesk-php70-odbc plesk-php70-opcache plesk-php70-pdo plesk-php70-pear

plesk-php70-pgsql plesk-php70-process plesk-php70-pspell plesk-php70-release plesk-php70-snmp plesk-php70-soap plesk-php70-tidy plesk-php70-xml plesk-php70-xmlrpc

psa-locale-base-en-us

29 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.

1 nicht vollständig installiert oder entfernt.

Es müssen 15,3 MB an Archiven heruntergeladen werden.

Nach dieser Operation werden 5.581 kB Plattenplatz zusätzlich benutzt.

Möchten Sie fortfahren? [J/n] y

Holen: 1 http://autoinstall.plesk.com/debian/PSA_12.5.30/ jessie/all plesk-mail-pc-driver amd64 12.5.30-debian8.0.build1205160128.15 [1.126 kB]

Holen: 2 http://autoinstall.plesk.com/debian/PSA_12.5.30/ jessie/all plesk-l10n all 12.5.30-debian8.0.build1205160127.23 [7.871 kB]

Holen: 3 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-ldap amd64 7.0.3-debian8.0.16021112 [19,5 kB]

Holen: 4 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-process amd64 7.0.3-debian8.0.16021112 [18,3 kB]

Holen: 5 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-mcrypt amd64 7.0.3-debian8.0.16021112 [12,7 kB]

Holen: 6 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-pdo amd64 7.0.3-debian8.0.16021112 [399 kB]

Holen: 7 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-mysql amd64 7.0.3-debian8.0.16021112 [121 kB]

Holen: 8 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-mbstring amd64 7.0.3-debian8.0.16021112 [460 kB]

Holen: 9 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-xmlrpc amd64 7.0.3-debian8.0.16021112 [33,0 kB]

Holen: 10 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-opcache amd64 7.0.3-debian8.0.16021112 [76,0 kB]

Holen: 11 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-imap amd64 7.0.3-debian8.0.16021112 [27,8 kB]

Holen: 12 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-cli amd64 7.0.3-debian8.0.16021112 [2.225 kB]

Holen: 13 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-bcmath amd64 7.0.3-debian8.0.16021112 [14,0 kB]

Holen: 14 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-pgsql amd64 7.0.3-debian8.0.16021112 [53,6 kB]

Holen: 15 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-dba amd64 7.0.3-debian8.0.16021112 [20,6 kB]

Holen: 16 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-soap amd64 7.0.3-debian8.0.16021112 [112 kB]

Holen: 17 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-intl amd64 7.0.3-debian8.0.16021112 [122 kB]

Holen: 18 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-snmp amd64 7.0.3-debian8.0.16021112 [17,3 kB]

Holen: 19 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-gd amd64 7.0.3-debian8.0.16021112 [106 kB]

Holen: 20 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-tidy amd64 7.0.3-debian8.0.16021112 [14,8 kB]

Holen: 21 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-pspell amd64 7.0.3-debian8.0.16021112 [6.642 B]

Holen: 22 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-odbc amd64 7.0.3-debian8.0.16021112 [29,4 kB]

Holen: 23 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-fpm amd64 7.0.3-debian8.0.16021112 [1.436 kB]

Holen: 24 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-enchant amd64 7.0.3-debian8.0.16021112 [7.608 B]

Holen: 25 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-xml amd64 7.0.3-debian8.0.16021112 [72,8 kB]

Holen: 26 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70 amd64 7.0.3-debian8.0.16021112 [385 kB]

Holen: 27 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-release amd64 7.0.3-debian8.0.16021112 [1.018 B]

Holen: 28 http://autoinstall.plesk.com/debian/PHP_7.0.3/ jessie/all plesk-php70-pear all 1.10.0dev2-debian8.0.16021112 [268 kB]

Holen: 29 http://autoinstall.plesk.com/debian/PSA_12.5.30/ jessie/all psa-locale-base-en-us all 12.5.30-debian8.0.build1205160204.13 [200 kB]

Es wurden 15,3 MB in 0 s geholt (28,0 MB/s).

(Lese Datenbank ... 124755 Dateien und Verzeichnisse sind derzeit installiert.)

Vorbereitung zum Entpacken von .../plesk-mail-pc-driver_12.5.30-debian8.0.build1205160128.15_amd64.deb ...

Any ideas on that?

 

[IgorG]

If you have a lot of email accounts, mchk process can take a lot of time for this maildriver upgrade.
But more detail from logs would be very useful for investigation of this issue.

 

[ehrenwert]

The task worked all night without success.

Which logs do you need?

The is the psa-upgrade-log:

Pakete werden installiert
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
libaudio2 libice6 libmng1 libqtcore4 libqtgui4 libsm6 libxt6 qtcore4-l10n
x11-common
Use 'apt-get autoremove' to remove them.
The following packages will be upgraded:
plesk-mail-pc-driver
1 upgraded, 0 newly installed, 0 to remove and 28 not upgraded.
1 not fully installed or removed.
Need to get 0 B/1126 kB of archives.
After this operation, 0 B of additional disk space will be used.
(Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 124755 files and directories currently installed.)
Preparing to unpack .../plesk-mail-pc-driver_12.5.30-debian8.0.build1205160128.15_amd64.deb ...
Warning: XML answer is already sent (try to send '')
Warning: XML answer is already sent (try to send '')
Warning: XML answer is already sent (try to send '')
Warning: XML answer is already sent (try to send '')
Warning: XML answer is already sent (try to send '')
Warning: XML answer is already sent (try to send '')
Warning: XML answer is already sent (try to send '')
Warning: XML answer is already sent (try to send '')
Warning: XML answer is already sent (try to send '')
...

 

[IgorG]

Try to find all autoinstaller processes with

# ps aux | grep -i auto

and then kill them all. After that run autoinstaller again.

 

[ehrenwert]

This also failed:

Stuck at:

27 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
1 not fully installed or removed.
Need to get 0 B/7186 kB of archives.
After this operation, 23.6 kB of additional disk space will be used.
(Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 124755 files and directories currently installed.)
Preparing to unpack .../plesk-mail-pc-driver_12.5.30-debian8.0.build1205160128.15_amd64.deb ...

 

[IgorG]

Do you have enough free disk space and inodes on this partition?

 

[ehrenwert]

I think so:

Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf

/dev/dm-0 477G 104G 349G 23% /

udev 10M 0 10M 0% /dev

tmpfs 1,6G 51M 1,6G 4% /run

tmpfs 4,0G 0 4,0G 0% /dev/shm

tmpfs 5,0M 0 5,0M 0% /run/lock

tmpfs 4,0G 0 4,0G 0% /sys/fs/cgroup

/dev/sda1 236M 33M 191M 15% /boot

 

[ehrenwert]

Hello,

I restarted the upgrade-process after clearing apt-sources

root 26423 2.6 0.6 91948 52744 pts/6 S+ 21:17 1:43 apt-get upgrade

root 26950 0.0 0.3 49956 29212 pts/7 Ss+ 21:18 0:00 /usr/bin/dpkg --status-fd 64 --unpack --auto-deconfigure /var/cache/apt/archives/plesk-mail-pc-driver_12.5.30-debian8.0.build1205160128.15_amd64.deb /var/cache/apt/archives/libgraphite2-3_1.3.5-1~deb8u1_amd64.deb /var/cache/apt/archives/multiarch-support_2.19-18+deb8u3_amd64.deb

This takes 2 hours again now.

 

[ehrenwert]

I think the problem is solved: As I mentioned in the logs the server did go down for restart (power failure). I restarted it and manually ran fsck . After this the dpkg reconfiguration worked fine and the update process of the packages worked without problems.