• If you are still using CentOS 7.9, it's time to convert to Alma 8 with the free centos2alma tool by Plesk or Plesk Migrator. Please let us know your experiences or concerns in this thread:
    CentOS2Alma discussion

Download speed from Odin servers.

IgorG

Plesk addicted!
Plesk Certified Professional
Dear Plesk users,

If you met any problems with downloading from Odin servers (autoinstall.plesk.com or autoinstall-win.pp.parallels.com) - please describe this problem briefly and specify geographic location (country, city) of your Plesk server.

Thanks.
 
Hello,
page of the update no load. It is very, very slow.. My server is located:

Leaseweb
Amsterdam
Netherlands

EDIT::: My server is linux.

regards,
 
Same here (Vienna/Austria), countless "Operation too slow...trying other mirror" errors and extremely slow download speed using autoinstall, mostly at night.
Much faster during the day, but installation still fails sometimes with the following error:
http://autoinstall.plesk.com/PSA_12...0n-12.0.18-cos6.build1200150225.12.noarch.rpm: [Errno 12] Timeout on http://autoinstall.plesk.com/PSA_12...0n-12.0.18-cos6.build1200150225.12.noarch.rpm: (28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds')

YumDownloadError: [u'Errors were encountered while downloading packages.', u'plesk-l10n-12.0.18-cos6.build1200150225.12.noarch: failure: base/plesk-l10n-12.0.18-cos6.build1200150225.12.noarch.rpm from PSA_12_0_18-dist: [Errno 256] No more mirrors to try.']
 
Unfortunately, it's getting worse and worse, every day..... :( ... I spent far too much time on waiting for downloads.... :rolleyes: ... please give autoinstall.plesk.com some energy drinks and a flashlight, so that the data find their way through the dark internet. ^^

my server locations: Germany
my servers are all on Debian and Ubuntu
 
Melbourne, Australia. From both Internode and Vocus it appears to be equally bad.
Just trying to test some automatic installation, unfortunately the installer is unusable:

File downloading nginx.inf3: Error: The requested URL returned error: 504, retry...
17%..62%..100% was finished.
[...]
Gathering information about installed license key...
Loaded plugins: fastestmirror
http://autoinstall.plesk.com/NGINX_1.6.0/dist-rpm-CentOS-7-x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 504 - Gateway Timeout
Trying other mirror.
Failed to install awstats:
Error while downloading packages metainfo: failure: repodata/repomd.xml from NGINX_1_6_0-dist: [Errno 256] No more mirrors to try.
http://autoinstall.plesk.com/NGINX_1.6.0/dist-rpm-CentOS-7-x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 504 - Gateway Timeout. Trying again.
http://autoinstall.plesk.com/NGINX_1.6.0/dist-rpm-CentOS-7-x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 504 - Gateway Timeout
Trying other mirror.
Failed to install awstats:
Error while downloading packages metainfo: failure: repodata/repomd.xml from NGINX_1_6_0-dist: [Errno 256] No more mirrors to try.
http://autoinstall.plesk.com/NGINX_1.6.0/dist-rpm-CentOS-7-x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 504 - Gateway Timeout. Trying again.
http://autoinstall.plesk.com/NGINX_1.6.0/dist-rpm-CentOS-7-x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 504 - Gateway Timeout
Trying other mirror.
Failed to install awstats:
Number of retries is exceeded.
NoMoreMirrorsRepoError: failure: repodata/repomd.xml from NGINX_1_6_0-dist: [Errno 256] No more mirrors to try.
http://autoinstall.plesk.com/NGINX_1.6.0/dist-rpm-CentOS-7-x86_64/repodata/repomd.xml: [Errno 14] HTTP Error 504 - Gateway Timeout
Error: The requested URL returned error: 504, retry...

ERROR: The Yum utility failed to install the required packages.
Attention! Your software might be inoperable.
Please, contact product technical support.
 
Guys, thank you all for your reports! We are working on this problem.
 
Location Europe Düsseldorf

(28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds')
The Yum utility failed to install the required packages.
Attention! Your software might be inoperable.

at 50% of the server faulty update
the morning then Plesk Panel is not called
the problem persists for many weeks
when the problem is solved?
 
Location US - Central

As of yesterday evening's update:

(28, 'Operation too slow. Less than 1 bytes/sec transfered the last 30 seconds') The Yum utility failed to install the required packages. Attention! Your software might be inoperable.
 
Ladies and gentlemen,

Today we fixed problems with our CDN and now you will receive updates with speed of a rocket.
 
on debian 7 i install it and work perfectly
but when i try to install in ubuntu 14.04 aarch 64bit i have this connection error!

Code:
root@dope:~# ./plesk-installer.sh
--2015-11-04 04:17:18--  http://autoinstall.plesk.com/Parallels_Installer/parallels_installer_Ubuntu_14.04_aarch64
Resolving autoinstall.plesk.com (autoinstall.plesk.com)... 93.184.221.133
Connecting to autoinstall.plesk.com (autoinstall.plesk.com)|93.184.221.133|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2015-11-04 04:17:18 ERROR 404: Not Found.
ERROR: Unable to run Plesk Installer. Possible reasons:
1) You are trying to run Plesk Installer on an unsupported OS. Your OS is Ubuntu-14.04. The list of supported OS is at http://www.odin.com/products/plesk/requirements/
2) Temporary network problem. Check your connection to autoinstall.plesk.com, contact your provider or open a support ticket.
root@dope:~#
 
Back
Top